Revue des composites et des matériaux avancées – n° 3-4/2016, 435-449 Choice between film or powder of PA11 for processing flax fiber-reinforced composites Fanny Destaing 1 , Patricia Jouannot-Chesney 2 , Moussa Gomina 2 , Joël Bréard 3 1. Cetim, 74 route de la Jonelière, F-44308 Nantes Cedex 3, France 2. Crismat, UMR 6508 CNRS, ENSICAEN 6 Boulevard Maréchal Juin, F-14050 Caen Cedex 4, France moussa.gomina@ensicaen.fr 3. LOMC, UMR 6294 CNRS, Université du Havre 53 rue Prony, BP540, 76058 Le Havre, France ABSTRACT. The biosourced Polyamide 11 (PA11) is envisaged as a matrix in structural eco- composites in combination with long flax fibers. Herein we compare the thermal, rheological, physical, mechanical and hydrothermal behavior of PA11 available as film or powder. These data are used for choosing between the two forms of the PA11 and to determine the temperature, holding time and pressure ranges suited for the elaboration of biocomposites by induction heating. RÉSUMÉ. Le polyamide 11 (PA11) biosourcé est envisagé comme matrice d’éco-composites structuraux en association avec des fibres longues de lin. Ici nous comparons les comportements thermiques, rhéologiques, physiques, mécaniques et hygrothermiques de deux types de PA11 (sous forme de film ou de poudre). Ces données sont utiles pour choisir sous quelle forme il faudra utiliser le PA11, et pour déterminer la température, le temps de maintien et les plages de pression convenables pour l’élaboration de composites biosourcés en procédant par un chauffage inductif. KEYWORDS: PA11 thermoplastic resin, flax fiber, thermal characteristics, physical and mechanical properties, rheology, thermocompression biocomposites, hydrothermal ageing. MOTS-CLÉS : résine thermoplastique PA11, fibre de lin, caractéristiques thermiques, propriétés physiques et mécaniques, rhéologie, thermocompression, biocomposites, vieillissement hygrothermique. DOI:10.3166/RCMA.26.435-449 © Lavoisier 2016