Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak dengan Menggunakan Proses Pirolisis 2238 Volume 2 No. 10 Februari 2023 (2238-2243) e-ISSN: 2798-5210 p-ISSN: 2798-5652 Pengolahan Sampah Plastik Menjadi Bahan Bakar Minyak dengan Menggunakan Proses Pirolisis Processing Plastic Waste into Fuel Oil using Pyrolysis Process Moh. Abiyyu Haidar, Nor Faizeh, Bambang Wahyudi Universitas Pembangunan Nasional “Veteran” Jawa Timur , Indonesia *Email: mohammad.abiyyu.haidar@gmail.com, norfaizeh23@gmail.com *Correspondence: Moh. Abiyyu Haidar DOI: 10.36418/comserva.v2i10.625 Histori Artikel Diajukan : 25-01-2023 Diterima : 16-02-2023 Diterbitkan : 26-02-2023 ABSTRAK Penggunaan plastik semakin meningkat seiring dengan berkembangnya aktifitas ekonomi masyarakat. Masalah sampah plastik masih menjadi momok besar dalam kehidupan moderen ini meskipun telah didaur ulang dengan sedemikian rupa. Oleh karena itu diperlukan adanya proses pengolahan lebih lanjut. salah satunya yakni dengan melalui proses pirolisis. Pirolisis ialah proses dekomposisi suatu bahan pada suhu tinggi yang berlangsung tanpa adanya udara atau udara terbatas. Tujuan diadakan penelitian ini yaitu memberikan solusi cara pengolahan limbah sampah plastik dan untuk mengetahui % Yield pada bahan bakar minyak yang dihasilkan. Adapun metode penelitian yang dilakukan yaitu Sampah plastik dibersihkan, dijemur kemudian di pirolisis, hasil minyak diukur volumenya kemudian dihitung % yieldnya menggunakan rumus % yield. Hasil penelitian ini menunjukan bahwa % Yield paling tinggi pada suhu 400 oC sebesar 5,0410%, t= 40 menit, v= 39 ml. karena jika bahan baku sampah plastik di proses dengan menggunakan temperature tinggi maka rantai karbon akan lebih mudah terengkah atau memutus ikatan. Dimana yield yang dihasilkan semakin meningkat seiring dengan meningkatnya temperature reaksi. Kata Kunci: Bahan Bakar Minyak; Pirolisis; Sampah Plastik ABSTRACT The use of plastic is increasing along with the development of people's economic activities. The problem of plastic waste is still a big scourge in this modern life even though it has been recycled in such a way. Therefore, it is necessary to have a further processing process. One of them is by going through the pyrolysis process. Pyrolysis is the process of decomposition of a material at high temperatures that takes place in the absence of limited air or air. The purpose of this study is to provide solutions for how to treat plastic waste and to find out the % yield on the fuel oil produced. The research method carried out is plastic waste cleaned, dried in the sun then pyrolyzed, oil yield measured in volume and then calculated % yield using the % yield formula. The results of this study show that the highest % yield at a temperature of 400 oC is 5.0410%, t = 40 minutes, v = 39 ml. Because if the raw material for plastic waste is processed using high temperatures, the carbon chain will be easier to break or break the bond. Where the yield produced is increasing along with the increase in reaction temperature. Keywords: Fuel Oil; Pyrolysis; Plastic Waste PENDAHULUAN