POLI REKAYASA Volume 12, Nomor 2, April 2017 ISSN : 1858-3709 13 Pengaruh Sudut dan Jari-Jari Saluran Menikung terhadap Konsentrasi Aliran Sedimen Suspensi arah Transversal Effect Of Angle And Radius Of Curved Channel Flows At Concentration Of Suspended Sediment In Transversal Direction Chairul Muharis Jurusan Teknik Sipil Politeknik Negeri Padang Kampus Limau Manis Padang Telp. 0751-72590 Fax. 0751-72576 Email: ch_muharis@yahoo.com Abstract The change in channel dimension has a great effect on the flow hydraulic parameters. Likewise, the angle and radius of the bend are not the same will also affect the concentration of suspended sediment flow. To determine the effect of angle and radius of the bend, the measurement of susupended sediment concentration was done at 4 (four) location in Mataram irrigation channel curve. The four locations describe 2 channels having relatively the same angle but having different radius, and 2 (two) channels having the same relative radius but having different angles. Measurement of suspended sediment concentration in tranversal direction is done some depth point used by opcon probe. The results of the research for different angle of bend shows that from the interance to the end of the channel bend so the trend of suspended sediment concentration value are decreases. After the end of the channel bend started there is no more the angle influenced, the trend value of suspended sediment concentration are constant. As for the different radius, the value of suspended sediment concentration is still relatively the same and there is no change significantly. This shows that the relation or influence between the length of the radius of the bend with the value of the suspended sediment concentration is not visible Keywords: concentration, angle of bend, radius of bend PENDAHULUAN Apabila debit sungai lebih besar dari debit bankfull, biasanaya akan terjadi penggerusan (scouring) pada sisi luar tikungan sungai dan menimbulkan tebing sungai longsor. Kejadian longsor sangat tergantung pada besarnya gerusan yang terjadi. Tidak semua daya gerus pada aliran menikung disebabkan oleh besarnya debit, karena masih banyak karakteristik aliran yang belum diketahui sebagai penyebabnya, seperti pengaruh besar sudut tikungan, panjang jari-jari tikungan dan pengaruh aspek rasio dari penampang aliran. Konsentrasi sedimen suspensi pada suatu aliran sangat dipengaruhi parameter hidraulik aliran itu sendiri, seperti kecepatan aliran. Beberapa peneliti telah mengemukakan bahwa kecepatan aliran dapat mempengaruhi konsentrasi sedimen suspensi. Peneliti tersebut antara lain, Coleman (1986) dalam Kironoto (2007a), melakukan penelitian mengenai pengaruh sedimen suspensi terhadap distribusi kecepatan pada saluran terbuka, melaporkan bahwa adanya bed load mempengaruhi kandungan konsentrasi sedimen suspensi, yang juga mempengaruhi bentuk distribusi kecepatan dan distribusi konsentrasi sedimen suspensi. Ketebalan lapisan logaritmik dari profil kecepatan menurun sedangkan konsentrasi sedimen suspensi meningkat. Sebagaimana dipaparkan diatas bahwa kecepatan aliran dapat mempengaruhi konsentrasi sedimen suspensi, sedangkan kecepatan aliran ssendiri sangat dipengaruhi oleh parameter hidrauliknya, seperti dimensi saluran, profil saluran, termasuk juga sudut tikungan dan jari-jari tikungan. Sehingga untuk mengetahui keterkaitan antara konsentrasi sedimen suspensi dengan parameter hidrauliknya maka dilakukan penelitian pengaruh sudut dan jari-jari tikungan terhadap konsentrasi sedimen