181 Rev. Fac. Ing. Univ. Antioquia N. º69 pp. 181-192, Diciembre, 2013 Application of CFD to the design of the runner of a propeller turbine for small hydroelectric power plants Aplicación de CFD para el diseño del rodete de una turbina tipo hélice para pequeñas centrales hidroeléctricas Edwin Lenin Chica Arrieta * , Sergio Agudelo Flórez, Natalia Isabel Sierra Department of Mechanical Engineering. Faculty of Engineering. University of Antioquia. Calle 67 No. 53-108. Medellín, Colombia. (Recibido el 21 de noviembre de 2012. Aceptado 11 de octubre de 2013) Abstract A procedure for the design of the runner of a pico hydraulic propeller turbine according to the specifc conditions of water potential of the site of operation is presented based on a theoretical and technical analysis. For this purpose the main characteristics of the runner are determined and data such as the suction head, the rated fow, and the occurring forces are established during the design. Modern engineering tools such as Computational Fluid Dynamics (CFD) are utilized for predicting the fow and Computer Aided Engineering software (CAE) for the design verifcation. The Runner of the Propeller Turbines (RPT) designed can be a viable option for electricity generation in not interconnected zones (NIZ) of the national interconnected electric system in developing countries and can be manufacture locally. Keywords: Propeller turbine, small hydropower, rural electrifcation, CFD, CAE, NIZ Resumen En este artículo se presenta un procedimiento para el diseño del rodete de una turbina hidráulica tipo hélice de acuerdo con las condiciones específcas del potencial del agua del sitio de operación basado en un análisis teórico y técnico. Para este fn, las principales características del rodete se determinan y datos tales como la cabeza de succión, el caudal nominal, y las fuerzas que * Autor de correspondencia: teléfono:+ 57 + 4 + 2198553, correo electrónico: echica@udea.edu.co (E. Chica)