Journal Pre-proof Fabrication of poly(lactic acid)/Ti composite scaffolds with enhanced mechanical properties and biocompatibility via fused ﬁlament fabrication (FFF)–based 3D printing Jina Lee, Hyun Lee, Kwang-Hee Cheon, Cheonil Park, Tae-Sik Jang, Hyoun-Ee Kim, Hyun-Do Jung PII: S2214-8604(19)30856-5 DOI: https://doi.org/10.1016/j.addma.2019.100883 Reference: ADDMA 100883 To appear in: Additive Manufacturing Received Date: 26 June 2019 Revised Date: 2 September 2019 Accepted Date: 19 September 2019 Please cite this article as: Lee J, Lee H, Cheon K-Hee, Park C, Jang T-Sik, Kim H-Ee, Jung H-Do, Fabrication of poly(lactic acid)/Ti composite scaffolds with enhanced mechanical properties and biocompatibility via fused ﬁlament fabrication (FFF)–based 3D printing, Additive Manufacturing (2019), doi: https://doi.org/10.1016/j.addma.2019.100883 This is a PDF ﬁle of an article that has undergone enhancements after acceptance, such as the addition of a cover page and metadata, and formatting for readability, but it is not yet the deﬁnitive version of record. This version will undergo additional copyediting, typesetting and review before it is published in its ﬁnal form, but we are providing this version to give early visibility of the article. Please note that, during the production process, errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertain. © 2019 Published by Elsevier.