The effect of feed transportation and an automatic feeding system on the physical and chemical quality of pelleted feed for broiler chickens Lorenzetti, W.R.¹; Lorenzetti, R.G.²; Sachet, J.P.¹; Migliorini, M.J.¹; Barreta, M.¹; Paiano, D.¹; Zampar, A.¹; Da Silva, A.S.¹; Boiago, M.M. 1@ ¹Department of Animal Science - Universidade do Estado de Santa Catarina, Chapecó, SC, Brazil. ²Veterinarian, Santa Catarina, Brazil. ADDITIONAL KEYWORDS Helicoid. Mineral matter. Pellet. Segregation. SUMMARY The effects of feed transportation and the use of an automatic feeding system on chemical-physical characteristics of pelleted feed for broiler chickens at the final stage of production were evaluated. Samples were collected in two consecutive days and in two different poultry houses, both equipped with the same type of automatic pan feeding system. The samples were collected at the exit of the pelletizer dryer (PEL), at the exit of the bulk truck (CAM) and at 0 (LIN0), 50 (LIN50) and 100 (LIN100) meters of the feed line, for analysis of water activity, dry matter, mineral matter, crude protein, Embrapa Pelletizing Evaluation Method, Pellet Durability Index, as well as coarse and fine percentages. It was used a complete randomized block design (DBC) with five treatments (collection points) and five repli- cates each. The results indicate that the physical feed quality was negatively affected by transportation, with increased (P<0.05) water activity, fine particles (P<0.001) and mineral matter at the beginning of the feed line. There was no change in crude protein levels in the dry and natural matter of the diet (P>0.05). Feed truck unloading at the silo is the main factor affecting its physical quality causing greater pellet breakdown and de-mixing. INFORMATION Cronología del artículo. Recibido/Received: 18.05.2018 Aceptado/Accepted: 13.08.2018 On-line: 15.07.2019 Correspondencia a los autores/Contact e-mail: mmboiago@gmail.com Efecto del transporte y de un sistema automático de alimentación sobre la calidad física y química de los piensos granulados para pollos de engorde RESUMEN Evaluamos los efectos del transporte y del sistema de alimentación automática sobre las carac- terísticas químicas y físicas de los alimentos peletizados para pollos de engorde en la etapa final de producción. Las muestras se recogieron en dos días y en dos gallineros diferentes, ambos equipados con el mismo tipo de sistema automático de alimentación de placas. Las muestras se recolectaron a la salida del secador de peletización (PEL), a la salida del camión a granel (CAM) y a los 0 (LIN0), 50 (LIN50) y 100 (LIN100) metros de la línea de alimentación, para el análisis de actividad del agua, materia seca, materia mineral, proteína bruta, MEP (Método de Evaluación de Pelletización, Embrapa), IDB (Índice de Durabilidad del Bolita) y porcentajes gruesos y finos. Empleamos un diseño de bloques completos al azar con cinco tratamientos (puntos de recolección) y cinco repeticiones. Los resultados indican que la calidad física de la alimentación se vio afectada negativamente por los factores involucrados en el proceso de transporte, con mayor actividad de agua (P<0.05), aumento de partículas finas (P<0.001) y mayor porcentaje de materia mineral (P<0.05) al comienzo de la línea de alimentación. No hubo cambios en los niveles de proteína cruda en la ración seca y natural de la dieta (P>0.05). La descarga de la ración en el silo de la granja por el camión de grano es el factor de mayor descomposición de los pellets y la mezcla de la ración. PALABRAS CLAVE ADICIONALES Materia mineral. Helicoide. Bolita. Segregación. Arch. Zootec. 68 (263): 370-374. 2019. Archivos de Zootecnia Journal website: https://www.uco.es/ucopress/az/index.php/az/ INTRODUCTION Constant advances in many aspects of animal pro- duction provided better results in poultry farming. Despite them, most of the productive expenses of the activity have been related to animal feeding, represent- ing more than 60-70 % of its total cost. According to Paiano et al. (2014), the maximum nutritional utiliza- tion of food depends on numerous factors involved on feed production, especially the mixture. Pelletization is a mechanical process that combines food particles using high temperature (80 - 90 °C) and steam, with the objective to form pellets resilient to transportation and handling (Cardeal et al., 2014), lead- ing to low amounts of fne particles (Amerah et al., 2007), related to feed fragmentation and abrasion resis-