Precision Engineering 36 (2012) 1–9 Contents lists available at ScienceDirect Precision Engineering jou rnal h om epage: www.elsevier.com/locate/precision Review Nonrigid geometric metrology using generalized numerical inspection fixtures Hassan Radvar-Esfahlan, Souheil-Antoine Tahan ∗ Laboratoire d’Ingénierie des Produits, Procédés et Systèmes (LIPPS), École de Technologie Supérieure, 1100 Notre-Dame Ouest, Montréal, Qc., Canada, H3C 1K3 a r t i c l e i n f o Article history: Received 22 February 2011 Received in revised form 6 July 2011 Accepted 7 July 2011 Available online 18 July 2011 Keywords: Geometric inspection Compliant part Intrinsic geometry Geodesic distance Nonrigid registration Multidimensional scaling a b s t r a c t Freeform surfaces have become an integral part of the automobile and aerospace industries. The parts with a very thin wall in proportion to their size are referred to as nonrigid (or flexible) parts. Generally, for the geometric inspection of such flexible parts, special inspection fixtures, in combination with coordinate measuring systems (CMM), are used because these parts may have different shapes in a free state from the design model due to dimensional and geometric variations, gravity loads and residual strains. A general procedure to eliminate the use of inspection fixtures will be developed. Presented methodology is based on the fact that the interpoint geodesic distance between any two points of a shape remains unchangeable during isometric deformation. This study elaborates on the theory and general methods for the metrology of nonrigid parts. We will merge existing technologies in metric and computational geometry, statistics, and finite element method to develop a general approach to the geometrical inspection of nonrigid parts. © 2011 Elsevier Inc. All rights reserved. Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Prior works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.1. Geometric inspection of solid and flexible parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2.2. Rigid and nonrigid surface registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 3. Theoretical foundations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1. Metric spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.2. The fast marching method on range data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.3. Isometric embedding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.4. Geodesic distance interpolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3.5. Generalized multidimensional scaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. Nonrigid geometric metrology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4.1. Identification of geometric deviation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4.2. Generalized numerical inspection fixture (GNIF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5. Results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6. Conclusion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1. Introduction It is clear that quality product control is essential to company survival in a competitive market. With computer-aided inspection (CAI), raw data from a 3D scanner or CMM can be compared to ∗ Corresponding author. Tel.: +1 514 396 8687; fax: +1 514 396 8530. E-mail addresses: hassan.radvar-esfahlan.1@ens.etsmtl.ca (H. Radvar-Esfahlan), antoie.tahan@etsmtl.ca (S.-A. Tahan). the original CAD design to generate impressive inspection reports. Generally, for the geometric inspection of nonrigid parts, inspec- tion fixtures, in combination with coordinate measuring systems (CMM), are used. The aim of this study is to develop new method- ology to eliminate the use of inspection fixtures. Three-dimensional optical digitizing systems are suitable for the measurement of large-sized flexible parts for they allow non-contact measurement and are able to deliver, in a relatively short time, large clouds of points that are representative of object surfaces. The part is setup on a portable 3D optical digitizing system which is installed in 0141-6359/$ – see front matter © 2011 Elsevier Inc. All rights reserved. doi:10.1016/j.precisioneng.2011.07.002