Mar and Life Sci (2019) 1(1): - 32 - The capacity analysis of aquaculture production facilities from the Mediter- ranean region of Turkey Aydın Demirci *1 , Mehmet Fatih Can 2 , Özkan Akar 3 Marine and Life Sciences The Mediterranean Region of Turkey covers 17 % of the total number of aquaculture facilities and has only 8.5% total production capacity of the country. Considering the long coastline of Turkey in the Mediterranean, it can be said that this production figure is very low. In this study, therefore, fish production facilities in the Mediterranean Region of Turkey were analyzed and a decision support system was developed for the competent authorities and investors for future planning and investment activities. For these purposes, the production capacity statistics of the facilities for the year 2019 were taken into consideration. The random tree algorithm, which is one of the data mining methods, was used in data analysis and to set a decision support system. In the region, there is a total of 342 facilities engaged in aquaculture production in cages (31.28%), concrete ponds (60.81%), earth pools (5%), pond area (1.46%), closed-circuit (0.29%), and tanks (0.88%). It is seen that trout facilities constitute 87.42% and 59.66% of these facilities in number and capacity, respectively. The sea bream and sea bass facilities contribute to this capacity with 30.99 %. It was observed that the most concrete pond in the region was in Antalya province and the most cage was in Isparta province. All of the facilities that make production in concrete ponds are trout and 66.45% of these facilities are below 23 thousand kg of production capacity. They are 7 trout and 2 sea bream soil pond facilities having production capacity between 8750 kg and 140 thousand kg, and 2 African catfish,1 aquarium and 1 sea bass soil pond facilities having production capacity between 140 -350 thousand kg in the region. The production capacity of one of the trout facilities producing in pond areas is 24 thousand kg less and the other one is between 36 thousand tons and 59 thousand tons. It is seen that the capacity of 2 carp facilities producing in the pond area is between 24 thousand and 36 thousand kg and the capacity of 1 aquarium fish production is more than 59 thousand tons. Trout, catfish, sea bream and sea bass are produced in cages in the region. Of the 85 plants with a capacity of less than 550,000 kg, the rest of the plants producing trusses in trusses produce trout, except for one (catfish production). Trout are produced in all 6 facilities between 675 thousand kg and 925 thousand kg in cages. Sea bream and sea bass production are carried out in 3 plants with a capacity between 975 thousand kg and 1950 thousand kg, and sea bream are produced in 3 plants with a capacity between 1950 and 2500 thousand kg. As a result, the expansion of fish farming in cages, especially in the eastern part of the Mediterranean Region, will not only provide support to these regions but will also allow the fisheries production of our country to grow exponentially. 1 Iskenderun Technical University, Faculty of Marine Sciences and Technology, Department of MArine Technologies, Iskenderun, Hatay, Turkey 2 Iskenderun Technical University, Faculty of Marine Sciences and Technology, Department of Water Resources Management and Organization, Iskenderun, Hatay, Turkey 3 Iskenderun Technical University, Maritime Vocational School, Iskenderun, Hatay, Tukey Keywords Mediterranean region of Turkey Aquaculture production facilities Data mining Journal Homepage: https://dergipark.org.tr/tr/pub/marlife Research Article Cite this article as Demirci., A, Can, M. F. & Akar, Ö. (2019). apacity analysis of Mediterranean aquaculture production facilities. Marine and Life Sciences, 1(1):32-38. (In Turkish) Akdeniz Bölgesi ülkemizin toplam üretimindeki tesis sayısı açısından yüzde % 17’si ne, üretim kapasitesi bakımından ise ancak % 8,5 ine denk gelmektedir. Akdeniz’deki uzun sahil şeridini düşündüğümüzde bu üretim rakamının oldukça düşük olduğu söylenebilir. Bu çalışmada Akdeniz Bölgesinde yer alan balık üretim tesisleri analiz edilerek, gelecekte yapılacak planlama ve yatırım faaliyetleri için yetkili otoriteler ve yatırımcılara bir karar destek sistemi oluşturulmaya çalışılmıştır. Bunun için tesislerin 2019 yılına ait üretim kapasitesi istatistikleri dikkate alınmıştır. Verilerin analizinde ve karar destek sistemi oluşturmada veri madenciliği yöntemlerin den “Random tree” algoritması kullanılmıştır. Bölgede ağ kafes (% 31,28), beton havuz (% 60,81), toprak havuzlarda (% 5,26), gölet alanı (% 1,46), kapalı devre (% 0,29) ve tanklarda (% 0,88) üretim yapan toplam 342 tesis bulunmaktadır. Bu tesislerin sayıca ve kapasite olarak sırası ile % 87,42 ve % 59,66 kısmını alabalık tesislerinin oluşturduğu, kapasite olarak bunu % 30.99 luk payla çipura-levrek tesislerinin sağladığı görülmektedir. Bölgede en fazla beton havuzun Antalya ilinde, en fazla ağ kafesin ise Isparta ilinde olduğu görülmüştür. Beton havuzlarda üretim yapan tesislerin tamamı alabalık tesisi olup, bu tesislerin % 66,45 inin üretim kapasitesinin 23 bin kg ın altındadır. Toprak havuzlarda üretim kapasitesi 8750 kg ile 140 bin kg arasında bulunan tesislerde Alabalık (7 adet) ve çipura (2 adet) yetiştirilmekte, 140 bin kg ile 350 bin kg arasında Karabalık (2 adet), Akvaryum (1 adet) ve Levrek (1 adet) üretimi yapılmaktadır. Gölet alanlarda üretim yapan Alabalık tesislerinden 1 tanesinin üretim kapasitesinin 24 bin kg az, diğerinin ise 36 bin ton ile 59 bin ton arasındadır. Gölet alanda üretim yapan 2 adet sazan işletmesinin kapasitesinin 24 bin ile 36 bin kg arasında olduğu ve 1 adet akvaryum balıkları üretimi yapan işletmenin ise kapasitesinin 59 bin tondan fazla olduğu görülmektedir. Bölgede ağ kafeslerde Alabalık, yayın, çipura ve levrek üretimi yapılmaktadır. Ağ kafeslerde üretim yapan tesislerden kapasiteleri 550 bin kg altında bulunan 85 tesisten 1 tanesi hariç (yayın üretimi) geriye kalanı alabalık üretmektedir. Ağ kafeslerde üretim kapasitesi 675 bin kg ile 925 bin kg arasında 6 tesisin tamamında alabalık üretilmektedir. Kapasitesi 975 bin kg ile 1950 bin kg arasında 3 tesiste Çipura ve levrek üretimi yapılmakta, yine kapasitesi 1950 nin kg ile 2500 bin kg arasında bulunan 3 tesiste daha çipura levrek üretimi yapılmaktadır. Sonuç itibari ile özelikle Akdeniz Bölgesinin doğusunda ağ kafeslerde balık yetiştiriciliğinin yaygınlaştırılması sadece bu bölgelere destek sağlamanın ötesinde ülkemiz su ürünleri üretim rakamlarının katlanarak büyümesine imkân oluşturacaktır. Türkiye’nin Akdeniz Bölgesinde yer alan su ürünleri üretim tesislerinin kapa- site analizi ÖZET Anahtar Kelimeler Akdeniz bölgesi Su ürünleri üretim tesisleri Veri madenciliği 32-38 Demirci et al. Accepted: 27.12.2019 Received: 04.12.2019 ABSTRACT *Corresponding author: aydin.demirci@iste.edu.tr Affiliations