Iota 2022, ISSN 2774-4353, Vol.02, 03; doi: 10.31763/iota.v2i3.544 https://pubs.ascee.org/index.php/iota Review Article Internet of Things (IoT) Product Design and Modeling Amikom Purwokerto Hand Sanitizer (AMPUH) Alif Yahya Syafa’at 1 , Hasri Akbar Awal Rozaq 2 , Trisna Maulida 3 , Agnis Nur Afa Zumaroh 4 , Rona Sepri Ananda 5 , Imam Tahyudin 6 * 1,2,3,4,5,6 Informatics Engineering, Amikom Purwokerto University * Corresponding author: imam.tahyudin@amikompurwokerto.ac.id Abstract: In previous research, an automatic hand sanitizer prototype tool was made to prevent COVID-19. The product design in this research is quite complicated and too large. Then, in other studies, a prototype tool has also been made to measure body temperature. The study also had an inefficient prototype design. So, it can be concluded that no product design model is efficient, simple, and has its charm. In this research, the concept design method consists of several stages: planning, measurement, design, and implementation. To identify the production needs that will be used in making AMPUH product design, researchers carry out measurement stages based on a schematic series (Schematic) of the product to be made. AMPUH product designs are made with shapes and models that have been adapted to their components without reducing the aesthetic value, compatibility, complexity, and design applicability. The advantage of this product design is that it always looks at the compatibility with the components that will be installed in it so that it is certain that both in terms of form and function will work well. The drawback of this product design may still leave a little free space in it to minimize the remaining free space and repair. Keywords: Design Product, IoT, Corel Draw, Multimedia, COVID-19 1. INTRODUCTION Product design is a pioneer and the key to the success of a product penetrating the market [1]. Especially now, with the development of technology, product designs must follow the times or trends. As is the case today, many agencies are vying to make an innovation in preventing COVID-19. Product design plays an essential role in implementing a product because the shape indirectly affects the benefits and usability of the product [2]. In previous research, an automatic hand sanitizer prototype tool has been made to prevent COVID-19 [3]. However, the product design in this research is quite complex and too large. Then, in other studies, a prototype tool has also been made to measure body temperature [4]. The study also had an inefficient prototype design. Thus, it can be concluded that no product design model is efficient, simple, and has its charm. This research tries to overcome this problem by designing an automatic hand sanitizer [12-17] product and combining several sensors that can be placed in one product. Making product designs in this research is assisted by a 2D application called CorelDraw. Citation:A.Y.Syafa’at, H.A.A.Rozaq, T.Maulida,A.N.A.Zumaroh,R.S.Ana nda.,I.Tahyudin,“ Internet of Things (IoT) Product Design and Modeling Amikom Purwokerto Hand Sanitizer (AMPUH)”. Iota, 2022, ISSN 2774-4353, Vol.02, 03. https://doi.org/10.31763/iota.v2i3.54 4 Academic Editor : P.D.P.Adi Received : July, 03 2022 Accepted : July, 16 2022 Published : August, 19 2022 Publisher’s Note: ASCEE stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. Copyright: © 2022 by authors. Licensee ASCEE, Indonesia. This article is an open access article distributed under the terms and conditions of the CreativeCommons Atribution (CC BY) license (http://creativecommons.org/license s/by/4.0/).