© 2019 JETIR April 2019, Volume 6, Issue 4 www.jetir.org (ISSN-2349-5162) JETIREL06151 Journal of Emerging Technologies and Innovative Research (JETIR) www.jetir.org 992 DESIGN AND FABRICATION OF CAM COMPACTER WITH CONVEYOR SYSTEM Manjeet Singh 1 , Arjun 2 , Vishaldeep Singh 1 1 School of Mechanical Engineering, Lovely Professional University, Punjab 2 Research Scholar, School of Mechanical Engineering, Lovely Professional University, Punjab Abstract Nowadays the machine-like crusher being used at a very large scale in the mass production of concrete but these-machine are very costly and also produce the noise while working some of the crusher machines are like ball mill, gyratory crusher, compound crusher, impact crusher, cone crusher, VSI, and jam crusher, etc. This machine’s cost is in lakhs. The aim of this work is to fabricate the bricks and stone crushing machine at a low cost that can be purchasable by the customer so these-customer can use this machine at a small scale of work. The machine can be used in numerous days to days application such as in construction sites, producing red sands, packing, and fillers, decorating walls, Floor filling. The concern of using a low-cost machine is to reduce the manpower effort and time-saving. When we saw some workers giving their time in breaking the bricks with a hammer and hence the idea was inculcated in us to build a machine which would break the brick with least human effort and it will be powered by a motor and it can also be connected by the cycle which can make it more feasible and the machine will have a conveyor system. The mechanism would follow a principle of energy conservation and it would be eco-friendly as no fuel will be used to power the machine to drive the camshaft. Introduction Nowadays the machine-like crusher being used at a very large scale in the mass production of concrete but these-machine are very costly and also produce the noise while working some of the crusher machines are like ball mill, gyratory crusher, compound crusher, impact crusher, cone crusher, VSI, and jam crusher, etc. This machine’s cost is in lakhs. The aim of this work is to fabricate the bricks and stone crushing machine at a low cost that can be purchasable by the customer so these-customer can use this machine at a small scale of work. The machine can be used in numerous days to days application such as in construction sites, producing red sands, packing, and fillers, decorating walls, Floor filling. The concern of using a low-cost machine is to reduce the manpower effort and time-saving. When we saw some workers giving their time in breaking the bricks with a hammer and hence the idea was inculcated in us to build a machine which would break the brick with least human effort and it will be powered by a motor and it can also be connected by the cycle which can make it more feasible and the machine will have a conveyor system. The mechanism would follow a principle of energy conservation and it would be eco-friendly as no fuel will be used to power the machine to drive the camshaft. The main concern of this study is to fabricate the bricks crushing machine by using the available equipments at a lower cost. There isa different crushing machine available in the market but they are very costly and they can’t be usedat small scale works. Cam follower mechanism will be used to fabricate the crushing machine. Worm gear, ball bearing, induction motor other parts will be used the machine. crushing machine for use in the underground coal or mineral mines for accepting and pulverizing mined material and encouraging the squashed