Distilat. 2022, 8 (1), 54-63 p-ISSN : 1978-8789, e-ISSN : 2714-7649 http://distilat.polinema.ac.id Corresponding author: Jurusan Teknik Kimia Diterima: 19 Agustus 2021 Politeknik Negeri Malang Disetujui: 25 Agustus 2021 Jl. Soekarno-Hatta No.9, Malang, Indonesia E-mail: khalimatus22@gmail.com ANALISIS EFISIENSI HEATER PADA PENGOLAHAN STEAM UNIT 7 PEMBANGKIT LISTRIK TENAGA UAP Yunira Ayu Saputri 1 , Khalimatus Sa’diyah 1 , Erwan Yulianto 2 1 Jurusan Teknik Kimia, Politeknik Negeri Malang, Jl. Soekarno Hatta No. 9, Malang, Indonesia 2 PT POMI, Jl. Surabaya-Situbondo KM. 141, Bhinor, Paiton, Probolinggo, Indonesia yuniraayus@gmail.com, [khalimatus22@gmail.com] ABSTRAK Prinsip kerja industri pembangkit listrik tenaga uap secara umum adalah pembakaran batu bara pada boiler untuk memanaskan air dan mengubah air menjadi uap panas (superheated steam). Uap panas tersebut digunakan menggerakkan turbin dan menghasilkan tenaga listrik dari kumparan medan magnet di generator. Heater adalah salah satu alat penukar kalor yang banyak digunakan di industri pembangkit listrik yang berfungsi sebagai pemanas air umpan sebelum masuk ke boiler. Pada salah satu industri pembangkit listrik tenaga uap di Jawa Timur menggunakan dua tipe heater yaitu Low Pressure Heater (LPH) dan High Pressure Heater (HPH). Penelitian ini bertujuan untuk mengevaluasi perhitungan neraca massa dan efisiensi kerja alat heater di unit 7 pada salah satu industri pembangkit listrik tenaga uap di Jawa Timur. Terdapat 11 heater yang digunakan pada unit 7 yaitu HPH pada heater 8A, 8B, 7A, 7B, 6A dan 6B, dan LPH pada heater 4, 3, 2, 1A dan 1B. Dari hasil perhitungan neraca massa di unit 7 didapatkan nilai neraca massa yang balance dimana tidak ada komponen massa yang terbuang. Sedangkan pada hasil perhitungan efisiensi heater, didapatkan nilai efisiensi pada HPH berkisar antara 88,16% - 92,91% sedangkan nilai efisiensi LPH berkisar antara 76,48% - 87,36%, dengan batas nilai efisiensi minimal adalah 80%. Dari hasil perhitungan dapat disimpulkan bahwa heater pada pembangkit listrik tenaga uap tersebut bekerja dengan efektif untuk mentransfer panas sehingga proses bekerja dengan baik. Kata kunci: Heat Exchanger, Heater, Low Pressure Heater, High Pressure Heater ABSTRACT The working principle of the steam power industry in general is burning coal in a boiler to heat water and convert the water into superheated steam. The hot steam is used to drive the turbine and generate electricity from the magnetic field coils in the generator. Heater is a heat exchanger that is widely used in the power generation industry which functions as a feed water heater before it enters the boiler. In one industrial steam power plant in East Java, two types of heaters are used, namely Low Pressure Heater (LPH) and High Pressure Heater (HPH). This study aims to evaluate the calculation of the mass balance and work efficiency of the heater in unit 7 in the one of a steam power plant in East Java. There are 11 heaters used in unit 7, namely HPH on heaters 8A, 8B, 7A, 7B, 6A and 6B, and LPH on heaters 4, 3, 2, 1A and 1B. From the results of the mass balance calculation in unit 7, we get a balanced mass balance value where no energy is wasted. While the results of the heater efficiency calculation, the efficiency values for the HPH ranged from 88.16% - 92.91% while the efficiency values for the LPH ranged from 76.48% - 87.36%, with a minimum efficiency value limit of 80. %. From the calculation results it can be concluded that the heater at the steam power plant works effectively to transfer heat so that the process works well. Keywords: Heat Exchanger, Heater, Low Pressure Heater, High Pressure Heater 1. PENDAHULUAN