لتكنولوجياة الهندسة وا مجل مجلد53 لخاصد ا ، العد1 ، 7112 135 https://doi.org/10.30684/etj.35.1C.15 2412-0758/University of Technology-Iraq, Baghdad, Iraq This is an open access article under the CC BY 4.0 license http://creativecommons.org/licenses/by/4. Study Using Different Adsorbents Materials in Purification of Waste Lubricating Oil T.M. Hameed Ministry of Science and Technology, Baghdad. Email:tao_t15@yahoo.com M.M. Khudhair Ministry of Science and Technology, Baghdad. A.T. Jafar Ministry of Science and Technology, Baghdad. A. Asaad Ministry of Science and Technology, Baghdad. W. Nifal Ministry of Science and Technology, Baghdad. J. Huseen Ministry of Science and Technology, Baghdad. Received on 17/8/2016 & Accepted on 27/4/2017 Abstract The ash and residues of carbon materials, asphalt, water and dust are the main pollutants that result from the use of lubricating oils, which have serious effects on human health and the environment. The research aims to study the effect of various adsorption materials at different amount in purification of wastes lubricating oil, where the waste oil was treated with alumina, silica gel, Iraqi Attapulgite clay, where the results show that the last best in removing the ash materials from waste lubricating oil .The research focus in study the optimum conditions for adsorption by using Iraqi Attapulgite clay which include the amount of adsorbent temperature time of adsorption ,and speed of stirring during adsorption reaction. The results showed that the optimum conditions for adsorption 4g of adsorpant to 10 g of oil, at 60°C temperature for 60 min, with 600 rpm speed of stirring. The treated oil was viscosity, density, pour point, ash content, and total acid number were tested for treated oil and compared the results with the waste oil and fresh oil Viscosity(21.484),density(0.8740),pour point ( -17),flash point(192), acid number (0.448). Keywords: Waste lubricating Oil, Adsorbents, Purification, Optimum Conditions ة زيوت تنقية فياز مختلف مواد امتزراسة استخدام دمستهلكةيت ال التزي خلصة ال يعدالموادن ولكاربوت ارماد ومخلفا السفلتية اللماء وا والتربة منملوثات اللساسية انتجي ت التن جراء استخدام م زيت التزي يوت والتي لهاسانى صحة النأثيرات خطيرة عل ت والبيئة. يهدف البحثلحالي انسب مختلفةعة وباز متنوأثير مواد امتز إلى دراسة ت مستهلكةيت ال التزية زيوت تنقي في حيثازد من مواد المتز عدستهلك معة الزيت الم معامل تم مثليكا جلسل ،اللومينا ال وطين ازدة المتز لتحديد مات العراقيتبلكاي المثل ال، إذ وج ـ د أنبلكايت طين الت هوفضل ال في إزالةد من الزيت الرما نسبة امستهلك ل إذ بلغ ـ ت النسبة( 0.8959 ) استخدامن ثم تم ومبلكايت طين الت في على زيت منقىحصوللاز للمتزى لمثل الظروف ال دراسة لمازة ،دة الماية وتشمل كمية ا بدرجة عالاز وسرعة الحركةمن المتزاز ، زارة المتزجة حر در أثناءلنتائجاز ، بينت ا المتز أناز هيلمتزى لمثل الظروف ال( 4g ) لمازة ،دة الما من ا( 60°C ) ارةجة الحر هي درمثل الازلمتز ل) (30min هو الزمن مثل الاز ولمتز ل( rpm 600 ) از .لمتزى لمثل هي السرعة الازطبيق ظروف المتزهلك بعد ت المستوذج من الزيتعالجة نم م تم اويةته الكيميمقارنة فحوصامثلى عليه و الائيةزي والفيلج والزلمعامستهلك غير ا" من الزيت ال مع كل يتصلي ال ا لجديدالكثافة، ك لزوجة، ال نقطةلنسكاب، ا نقطة الوميض، محتوىلرماد الحامضي والرقم المعالجلزيت الفحوصات لئج ا نتا وكانت كما ي لي: لزوجة ال( 21.484 ( لكثافة، ا) 0.8740 ،) نقطةلنسكاب ا( -17 ، نقط) ة( الوميض192 ، محتو) ى(لرماد ا0.301 ، الرقم) ( لحامضي ا0.448 ) . ت الدالةكلما ال: زيوت مستهلكة،از، امتز تنقية، الظروفلمثالية ا