CURVE is the Institutional Repository for Coventry University A cure modelling study of an unsaturated polyester resin system for the simulation of curing of fibre- reinforced composites during the vacuum infusion process Aktas, A. , Krishnan, L. , Kandola, B. , Boyd, S. W. and Shenoi, R. A. Author post-print (accepted) deposited in CURVE January 2016 Original citation & hyperlink: Aktas, A. , Krishnan, L. , Kandola, B. , Boyd, S. W. and Shenoi, R. A. (2014) A cure modelling study of an unsaturated polyester resin system for the simulation of curing of fibre- reinforced composites during the vacuum infusion process. Journal of Composite Materials, volume 49 (20): 2529-2540 http://dx.doi.org/10.1177/0021998314549820 ISSN 0021-9983 ESSN 1530-793X DOI 10.1177/0021998314549820 Copyright © and Moral Rights are retained by the author(s) and/ or other copyright owners. A copy can be downloaded for personal non-commercial research or study, without prior permission or charge. This item cannot be reproduced or quoted extensively from without first obtaining permission in writing from the copyright holder(s). The content must not be changed in any way or sold commercially in any format or medium without the formal permission of the copyright holders. This document is the author’s post-print version, incorporating any revisions agreed during the peer-review process. Some differences between the published version and this version may remain and you are advised to consult the published version if you wish to cite from it.