For Peer Review Comparison of Hemodynamic and Structural Indices of Ascending Thoracic Aortic Aneurysm as predicted by 2-way FSI, CFD Rigid Wall Simulation and Patient-Specific Displacement-Based FEA Journal: Part H: Journal of Engineering in Medicine Manuscript ID Draft Manuscript Type: Original article Date Submitted by the Author: n/a Complete List of Authors: Mendez, Vincent; Ecole Polythechnique Fédérale de Lausanne Di Giuseppe, Marzio; Fondazione RiMED Pasta, Salvatore Keywords: Cardiovascular System Mechanics, Clinical Outcome Prediction, Finite Element Modelling/ Analysis [Medical], Haemodynamics Modelling, Finite Element [Biomechanics] Abstract: Patient-specific computational modeling is increasingly being used to predict structural and hemodynamic parameters, especially when current clinical tools are not accessible. In this contest, pathophysiology of ascending thoracic aortic aneurysm (ATAA) has been simulated to quantify patient risk by novel prognostic parameters and thus to improve the clinical decision-making process related to the intervention of ATAAs. In this study, the relevance of aneurysmal wall elasticity in determining parameters of clinical importance, such as shear stress, is discussed together with the significance of applying realistic boundary conditions to consider the aortic stretch and twist transmitted by the heart motion. Results from both finite element analysis (FEA) and computational fluid- dynamic (CFD) were compared to those of 2-way fluid-solid interaction analyses (FSI), which were carried out on ATAAs with either bicuspid aortic valve (BAV) or tricuspid aortic valve (TAV). Although the spatial distribution of wall shear (WSS) and intramural stresses (IMS) differed for a given ATAA, correlation analysis and Bland-Altman plots demonstrated that CFD-related WSS and FEA-related IMS predictions were comparable with those derived by a more sophisticated 2-way FSI modeling. This is likely caused by the stiff aneurysmal wall showing reduced diameter changes over cardiac beating (ie, 4.2±2.4%). Therefore, with the fact that there is no gold-standard for the assessment of hemodynamic and structural mechanics of ATAAs and with accepted limitations of our approach, computational technique has to be verified before applications in routine clinical practice as demonstrated in this study. http://mc.manuscriptcentral.com/(site) Journal name