International Journal of Trend in Scientific Research and Development (IJTSRD)
Volume 4 Issue 2, February 2020 Available Online: www.ijtsrd.com e-ISSN: 2456 – 6470
@ IJTSRD | Unique Paper ID – IJTSRD29871 | Volume – 4 | Issue – 2 | January-February 2020 Page 9
A Review: Tribological Analysis of Cast Iron by Advanced Coating
Prof. Matin A. Shaikh
1
, Prof. Ajij A. Shaikh
2
, Prof. Mrs. G. V. Patil
3
1,2
Assistant Professor,
3
Head & Professor
1
Fabtech Technical Campus, College of Engineering & Research, Sangola, Maharashtra, India
2
SVERIs College of Pharmacy Pandharpur, Maharashtra, India
3
BLDEAs VP Dr. P. G. Halakatti College of Engineering & Technology, Vijayapur, Bijapur, Karnataka
ABSTRACT
In our engineering system, friction, wear and tribology are not phenomena
that most peoples are considering on daily basis. Wear (tribological process)
occurs when two surfaces are in contact and both/one are moving relative to
each other. The cast iron is widely used in industrial sector. It have high rate of
friction. To reduce the friction the various types of coating is analyzed as well
as with lubrication the rate of wear decreases.
KEYWORDS: Tribology, Wear, Cast Iron, Coating
How to cite this paper: Prof. Matin A.
Shaikh | Prof. Ajij A. Shaikh | Prof. Mrs. G.
V. Patil "A Review: Tribological analysis of
Cast Iron by Advanced Coating" Published
in International
Journal of Trend in
Scientific Research
and Development
(ijtsrd), ISSN: 2456-
6470, Volume-4 |
Issue-2, February
2020, pp.9-14, URL:
www.ijtsrd.com/papers/ijtsrd29871.pdf
Copyright © 2019 by author(s) and
International Journal of Trend in Scientific
Research and Development Journal. This
is an Open Access article distributed
under the terms of
the Creative
Commons Attribution
License (CC BY 4.0)
(http://creativecommons.org/licenses/by
/4.0)
INRODUCTION
Usually wear is undesirable, because it makes necessary
frequent inspection and replacements of parts and also it
will lead to deterioration of accuracy of machine parts. It can
induce vibrations, fatigue and consequently failure of the
parts.
A tribology study reveals that even 15-20% reduction in
wear/friction can significantly reduce economic costs in
relation to environmental benefits [24].
To increase the Tribological performance of any substrate
material the coating is found. The small layer of hard
material coating is to be found to reduce the frictional force
and wear of the any part of the machine. The cast iron is
used due to low price, good machining and good damping
capability. But, it has huge friction so, to reduce friction
lubricant or coating is necessary to increase the tribological
performance of Cast iron. In certain automotive components
such as cylindrical liner, arms, sprockets, tool holders,
whereas spherical graphite cast iron is utilised in the
automotive field such as camshafts, crankshafts and
gears,cast iron is used [1].
Carbon is one of the commonest elements throughout the
universe. In the nature carbon is found as diamond, graphite
and amorphous carbon. The name of DLC was first coined by
Aisenberg in 1971. DLC coatings have been widely used in
the field of machine components due to their attractive
properties including chemical inertness, high hardness, and
wear and corrosion resistance [6].
LITERATURE SURVEY:
Some important previous studies and findings on wear
analysis, wear resistance properties of various materials,
with lubricants, without lubricants, some wear analysis has
been done with additives added in lubricants. In the
following section, various developments taken place in the
area of tribology and following fields is discussed with
appropriate reference given.
On various materials coating is available, by using
coating we can increase wear resistance property.
With dry condition wear analysis has been done.
With water based and with various types of lubricants
are used on coating.
Some %of additives added in lubricants and wear
analysis has been studied.
Majority of the contributions of this research work is related
to various types coatings is applied on materials and
increases the wear resistance property as well as density,
hardness, mechanical, tribological and microstructural study.
Major part of the wear analysis has been done without
lubricants, so the characteristics of wear induced by the
sliding contact piston ring cylinder liner without lubrication.
And it is to be analyze a comparative research about the
IJTSRD29871