480 한국표면공학회지 J. Korean Inst. Surf. Eng. Vol. 50, No. 6, 2017. https://doi.org/10.5695/JKISE.2017.50.6.480 <연구논문> ISSN 1225-8024(Print) ISSN 2288-8403(Online) 이온빔 처리된 폴리머 표면의 자가나노구조화를 이용한 반사방지 필름 제조용 소프트 몰드 임프린팅 연구 이승훈 a , 변은연 a , 최주연 a , 정성훈 a , 유병길 b , 김도근 a,* a 재료연구소 표면기술연구본부 플라즈마공정연구실, b 제이피이 Soft Mold Imprinting Fabrication of Anti-reflection Film using Self-Organized Nanostructure Polymer Surfaces Irradiated by Ion Beams Seunghun Lee a , Eun-Yeon Byeon a , Juyeon Choi a , Sunghoon Jung a , Byeong-Gil Yu b , and Do-Geun Kim a,* a Surface Technology Department, Korea Institute of Materials Science, 797 Changwon-Daero, Sungsan-gu, Changwon, 51508, Republic of Korea b JPE, 28 Kak-li, Ochang-Ub, Chungwon, 28126, Republic of Korea (Received December 7, 2017 ; revised December 21, 2017 ; accepted December 23, 2017) Abstract Soft mold imprinting method that uses nanostructured polymer mold was investigated for anti-reflection film fabrication. The nanostructured soft mold was polyethylene terephthalate(PET) irradiated by oxygen ion beams. The collisional energy transfer between oxygen ion and the polymer surface induced cross-linking and scission reactions, resulting in self-organized nanostructures with regular patterns of the wavenumber of 5 μm . Post processes including ultra-violet curable resin coating and delamination fabricated anti-reflection films. The imprinted resin surface also showed the consistent wavenumber, 5 μm . Pristine PET, oxygen ion beam treated PET, and imprinted replica sample showed total transmittance of 91.04, 93.25, and 93.57- 93.88%, respectively. Keywords : Anti-reflection, Nano structure, Polymer, Ion beam, Soft mold 1. 서 론 휴대폰, 태플릿 PC, 네비게이션과 같이 태양광, 조명이 존재하는 장소에서 사용되는 디스플레이는 외부 광원 반사에 의한 시인성 저하가 문제되고 있 다. 특히, 터치 스크린이 적용된 디스플레이는 최외 부 표면에서 발생되는 외부 광원의 정반사에 의한 시인성 저하가 심각해 사용 편의성이 저하되며, 디 스플레이 내부에서 형성된 이미지가 사용자에게 명 확하게 전달되지 못한다. 디스플레이 표면의 반사 도 감소를 위해 나노 구조 표면을 활용한 반사방지 고투과 필름이 사용되고 있으며, 상용화된 일본산 제품들은 약 93% 이상의 전광선 투과율을 가진다 [1-3]. 나노 구조를 이용한 반사방지 방법은 가시광 선 파장 이하의 주기를 갖는 미세 구조를 형성해 표면에서 매질 내부로 굴절률이 점차 변하게 하여 Fresnel 반사를 줄이는 방식이다. 나노 구조를 이용한 반사방지 폴리머 필름 제조 를 위해 임프린팅 방식이 널리 연구되고 있다[4]. 임프린팅법은 반사 방지가 가능한 나노 구조 몰드 를 이용해 나노 구조 표면을 가진 필름을 찍어내는 방식이며, 우수한 반사방지 특성을 가진 필름을 제 * Corresponding Author: Do-Geun Kim Korea Institute of Materials Science Tel: +82-55-280-3507; Fax: +82-55-280-3570 E-mail: dogeunkim@kims.re.kr