Accepted Article This article has been accepted for publication and undergone full peer review but has not been through the copyediting, typesetting, pagination and proofreading process, which may lead to differences between this version and the Version of Record. Please cite this article as doi: 10.1111/ijac.13152 This article is protected by copyright. All rights reserved. DR SHAHID ANWAR (Orcid ID : 0000-0002-8606-5352) Article type : Article Corresponding author mail id : shahidanwr@gmail.com Electrophoretic deposition studies of Ba(Zr-Ce-Y)O 3 ceramic coating Bishnu Choudhary, Sharmistha Anwar, Laxmidhar Besra and Shahid Anwar* CSIR-Institute of Minerals and Materials Technology, Bhubaneswar, Odisha, INDIA Absract Electrophoretic deposition (EPD) is now a well established colloidal processing technique which uses electrophoresis mechanism for movement of suspended charged particles in a suspension in the presence of an electric field. In this work, electrophoretic deposition of BaZr 0.4 Ce 0.4 Y 0.2 O 3-δ (BZCY) in ethanol medium was performed under different conditions on both conducting and non-conducting (porous anode) substrate without using any external additives in suspension bath. Process parameters such as deposition time, voltage and rate of deposition of suspended particles were studied under various conditions. Green coating deposited under different potential (30V, 50V and 70V) were uniform and crack free, even at extended time of deposition. Surface roughnesses have also been evaluated to correlate it with deposition conditions. It is also found that the rate of deposition on conducting substrate was higher as compared to that on non-conducting substrate (anode). XRD studies of the