JOM FMIPA Volume 1 No. 2 Oktober 2014 77 KARAKTERISASI BAHAN FERROELEKTRIK BARIUM STRONTIUM TITANAT (Ba 0.3 Sr 0.7 TiO 3 ) DENGAN MENGGUNAKAN DIFRAKSI SINAR-X (XRD) Rahmad Efendi, Rahmi Dewi, Krisman Jurusan Fisika Fakultas Matematika dan Ilmu Pengetahuan Alam Universitas Riau Kampus Bina Widya Pekanbaru, 28293, Indonesia endievend@yahoo.com ABSTRACT Ferroelectric materials of Barium Strontium Titanate (BST) with its composition of Ba 0,3 Sr 0,7 TiO 3 was succesfully deposited by a solid solution method. The samples were prepared in the form of pellets and then were annealed at the temperature of 600, 700, 800 o C. Characteritation of the samples was performed using X-Ray diffraction (XRD). The results of characteritation using XRD was described on a graph of the intensity vs. 2 theta. The XRD patterns of Ba 0,3 Sr 0,7 TiO 3 have peaks. It was confirmed that the material of Ba 0,3 Sr 0,7 TiO 3 has cubic crystalline structure, and its lattice parameter was in average of 3,961 Å. The particle sizes (D) and lattice strains (η) of the material that was annealed at temperature of 600, 700, 800°C for 1 hour were 42.60, 44.43, 46.89 nm and -4,49x 10 -3 , -4,05 x 10 -3 , -2,96 x 10 -3 , respectively. The increase in annealed temperature will raise the particle size and lattice strain. Keywords: Characteritation XRD, annealing, particle size, lattice strain ABSTRAK Material ferroelektrik Barium Strontium Titanat dengan komposisi Ba 0,3 Sr 0,7 TiO 3 telah berhasil dideposit menggunakan metode kimia padatan. Sampel dicetak dalam bentuk pelet dan kemudian diannealing pada temperatur 600 o C, 700 o C dan 800 o C. Karakterisasi pada sampel dilakukan menggunakan XRD. Hasil karakterisasi XRD dari sampel memperoleh data dan diolah dalam bentuk grafik hubungan antara intensitas terhadap sudut 2 theta. Pola difraksi XRD Ba 0,3 Sr 0,7 TiO 3 diketahui memiliki beberapa puncak. Material Ba 0,3 Sr 0,7 TiO 3 ini berbentuk kristalin dengan struktur kubus, dengan besar parameter kisi rata-rata adalah 3.961 Å. Ukuran partikel (D) dan regangan kisi (η) dari material Ba 0,3 Sr 0,7 TiO 3 yang dieanealing pada suhu 600°C, 700°C dan 800°C selama 1 jam yaitu masing - masing sebesar 42,60 nm, 44,43 nm, 46,89 nm dan -4,49x 10 -3 , -4,05 x 10 -3 , -2,96 x 10 -3 . Semakin besar ukuran partikel, rata-rata regangan kisi (η) semakin besar seiring dengan meningkat suhu annealing. Kata Kunci: Karakterisasi XRD, anealling, ukuran partikel, regangan kisi