The purpose of an errata sheet is to notify the public that a published standard has a typographical error. Errata sheets provide a list of errors and their corrections on an AWS standard introduced during the publication stages. (Errata Notice: 05/27/2020) AWS Errata Sheet The following Errata have been identified and will be incorporated into the next reprinting of AWS D1.1/D1.1M:2020, Structural Welding Code-Steel Page 9, term *dihedral angle: a return is missing between “See local dihedral angle” and “discontinuity” *dihedral angle. See local dihedral angle. discontinuity. An interruption of the typical structure of a material, such as a lack of homogeneity in its mechanical or metallurgical, or physical characteristics. A discontinuity is not necessarily a defect. Page 42, Table 4.5 entitled “Fatigue Stress Design Parameters (see 4.14.1)” -Description 5.6 replace “Formula 4” with “Formula 5” -Description 5.7 replace “Formula 4” with “Formula 5” -Description 8.2 replace “Formula 3” with “Formula 4” -Description 8.4 replace “Formula 3” with “Formula 4”