Rev. Téc. Ing. Univ. Zulia. Vol. 34, Nº 2, 97 - 106, 2011 CO oxidation on Pd supported catalysts over mixed oxides based on cerium Victor Ferrer 1 *, Dora Finol 1 y Miguel Ramos 2 1 Instituto de Superficies y Catálisis, Facultad de Ingeniería, Universidad del Zulia. P.O. Box 15251, Maracaibo 4003A, Venezuela. *ferrervictor@hotmail.com 2 Instituto Zuliano de Investigaciones Tecnológicas. Km. 15 carretera Vía a la Cañada, Apartado 331, Edo. Zulia, Venezuela. Abstract The 0,5Pd/Ce0,6Zr0,4Ox/SiO2; 1,5Pd/Ce0,6Zr0,4Ox/SiO2; 0,5Pd/Ce0,7Tb0,3Ox/SiO2 and 1,5Pd/ Ce0,7Tb0,3Ox/SiO2 catalysts were prepared by incipient wetness impregnation technique from aqueous so- lutions of palladium, cerium, zirconium and terbium chlorides. The catalysts were characterized by X-ray fluorescence (XRF), surface area, X-ray diffraction (XRD), CO chemisorption and Temperature-pro- grammed reduction (TPR). The catalytic behavior was studied using CO oxidation reaction. The TPR re- sults showed that the addition of Tb or Zr promoted the reducibility of cerium oxide at lower temperatures. CO chemisorptions and TPR results allowed to concluded that Pd addition to Ce0,6Zr0,4Ox/SiO2 and Ce0,7Tb0,3Ox/SiO2 supports generated PdO species of different nature that influence in the catalytic per- formance. The catalytic activity results showed that Zr addition enhances the catalytic activity of the sam- ples and 0,5Pd/Ce0,6Zr0,4Ox/SiO2 catalyst was the most active (Light off temperature = 140 ºC). The light-off temperatures indicated that low Pd loading favored the reaction. Key words: three-way catalysts, XRD, TPR, CO oxidation. Oxidación de CO en catalizadores de Pd soportados sobre óxidos mixtos basados en cerio Resumen Se prepararon los catalizadores de 0,5Pd/Ce0,6Zr0,4Ox/SiO2; 1,5Pd/Ce0,6Zr0,4Ox/SiO2; 0,5Pd/ Ce0,7Tb0,3Ox/SiO2 y 1,5Pd/Ce0.7Tb0.3Ox/SiO2, utilizando la técnica de impregnación a humedad incipien- te a partir de soluciones acuosas de cloruros de paladio, cerio, zirconio y terbio. Los catalizadores fueron caracterizados mediante las técnicas de Fluorescencia de rayos X (XRF), área superficial, Difracción de ra- yos X (XRD), Quimisorción de CO y Reducción a Temperatura Programada (TPR). El comportamiento ca- talítico de las muestras fue evaluado a través de la reacción de oxidación de CO. Los resultados de TPR mostraron que la adición de Tb ó Zr promueve la reducibilidad del óxido de cerio a más baja temperatura. Los resultados de quimisorción de CO y TPR permiten concluir que la adición de Pd a los soportes de Ce0,6Zr0,4Ox/SiO2 y Ce0,7Tb0,3Ox/SiO2 generan especies de PdO de distinta naturaleza, las cuales influyen en su comportamiento catalítico. Los resultados de actividad catalítica mostraron que la adición de Zr me- jora el comportamiento catalítico de las muestras, siendo el más activo el catalizador de 0,5Pd/Ce0,6Zr0,4Ox/SiO2 (Temperatura de light off = 140 ºC). Las temperaturas de light off reportadas indi- caron que la reacción se favorece con bajas cargas de Pd. Palabras clave: catalizadores de tres vías, XRD, TPR, oxidación de CO. Rev. Téc. Ing. Univ. Zulia. Vol. 34, No. 2, 2011