PRODUCCIÓN DE MgAl 2 O 4 . MEDIANTE MICROONDAS, UTILIZANDO GRAFITO COMO AUXILIAR EN EL CALENTAMIENTO Juan A. Aguilar Garib, Selene B. Salazar Rodríguez Facultad de Ingeniería Mecánica y Eléctrica Universidad Autónoma de Nuevo León Apartado Postal 076 F, Cd. Universitaria, San Nicolás de los Garza, NL 66450, México Tel. (8) 329-40-20 Ext. 5770, Fax. (8) 376-45-14 RESUMEN En este trabajo se presentan los resultados de las pruebas efectuadas para producir, utilizando microondas como fuente de energía, el espinel MgAl 2 O 4 . Las temperaturas que se alcanzaron durante los experimentos se encuentran alrededor de los 2000°C, es decir alrededor del punto de fusión del espinel, por lo que el material obtenido tiene cierta similitud con el que se produce mediante horno de arco eléctrico. Aunque los reactivos no son buenos absorbedores de microondas a temperatura ambiente, la alúmina absorbe mejor las microondas conforme se incrementa la ésta. Además el espinel producido a alta temperatura también es un buen absorbedor. Por el contrario, el grafito es un buen absorbedor de microondas a temperatura ambiente y se utiliza aquí como un auxiliar para llevar los reactivos hasta temperaturas en que sus propiedades permiten que sean procesados mediante microondas. Dado que el grafito disminuye significativamente su capacidad de absorción con la temperatura, un exceso de grafito afecta al proceso negativamente, por lo que en este trabajo se consideran diferentes relaciones grafito/reactivo. ABSTRACT The results of the tests carried out for applying microwaves, as an energy source, to the production of MgAl 2 O 4 are presented in this work. The achieved temperatures during the experiments were around 2000°C, close to the melting point of the spinel, thus the obtained material is somehow similar to the spinel produced in the electric arc furnace. Even when the reagents are not good microwave absorbers at room temperature, the alumina absorbs the microwaves better as the temperature is increased. Furthermore, the produced spinel at high temperature is also a good absorber. On the other hand, grafite is a good microwave absorber at room temperature and it is used as an additive for taking the reagents to temperatures where their properties allow them to be processed by means of microwaves. Graphite decreases its ability for absorbing microwaves as the temperature is increased, therefore an excesive graphite amount affects the process negatively. Thus in this work were considered different graphite/reagent ratios.