NDTCE’09, Non-Destructive Testing in Civil Engineering Nantes, France, June 30th – July 3rd, 2009 Evaluation of bonded FRP strengthening systems for concrete structures using Infrared Thermography and Shearography Frédéric TAILLADE 1 , Marc QUIERTANT 1 , Karim BENZARTI 1 and Christophe AUBAGNAC 2 1 Université Paris-Est, Laboratoire Central des Ponts et Chaussées (LCPC), Paris, France 2 Laboratoire Régional des Ponts et Chaussées d’Autun, Autun, France Abstract This paper presents a method for detection and characterization of the depth and width of defects (delaminations or adhesive disbonds) that can take place at the interface between the concrete substrate and the bonded FRP used for the reinforcement of concrete structures. Detection of disbonds between different layers is also possible. Moreover, this method can be used to evaluate the quality of adhesion of the FRP to the substrate (partial delamination, damage or poor mechanical properties of the resin). This method is based on two complementary techniques: shearography associated to a depressure solicitation on the one hand, and stimulated infrared thermography on the other hand. Theoretical and experimental analyses of adhesive disbonds are first presented. The performance of the method is then demonstrated using data from experimental inspection of specimens containing calibrated defects. In the inspected samples, debonded areas were simulated by locally replacing the epoxy resin with non-adherent polytetrafluoroethylene (PTFE) discs at the concrete-to-FRP interface or between different FRP layers. Résumé Cet article présente une méthode de détection et de caractérisation (largeur et profondeur) des défauts d’adhésion des matériaux composites (polymères renforcés de fibres) collés à la surface des structures en béton et destinés à les renforcer. La méthode proposée permet la détection de défauts de collage entre deux couches de matériaux de renfort. Elle permet de plus d’évaluer la qualité du collage (délaminage partiel, dégradation ou faible qualité initiale de l’adhésif). La méthode utilise deux techniques : la shearographie avec une sollicitation par dépression et la thermographie infrarouge stimulée. Nous présentons le principe de la méthode et des essais expérimentaux. La performance de la méthode est démontrée sur des corps d’épreuve dont les défauts de collage sont calibrés en remplaçant localement la résine de collage par une pastille de polytétrafluoroéthylène (PTFE). Cette substitution d’adhésif est effectuée, soit à l’interface adhésive entre le béton et le composite soit entre deux couches de renfort composite. Keywords Nondestructive testing, disbonds, concrete, carbon epoxy, fiber-reinforced polymer. 1 Introduction Strengthening or retrofitting of reinforced concrete structures by externally bonded Fiber- Reinforced Polymer (FRP) systems is now a commonly accepted and widespread technique. However, the use of bonding techniques always implies following rigorous installing procedures [1-3]. Moreover installation crews have to be trained in accordance with the installation procedure to ensure the durability and long-term performance of the FRP