Die Angewandte Makromolekulare Chemie 236 0996) 35 -41 (Nr 4102) Polymer Institute, Slovak Academy of Sciences, Dfbravskii cesta 9,842 36 Bratislava, Slovakia Adhesive properties of poly(propylene) modified in bulk Igor Noviik (Received 8 Mai 1995) SUMMARY Isotactic poly(propylene) (iPP) was modified in bulk by addition of low-molecular compounds, e.g. maleic anhydride, sodium maleate, fatty acids or their sodium salts and dibutyl phthalate. It was found that the dependence of the mechanical work of adhesion in the system modified iPP-poly(vinyl acetate) on the concentration of the low-molecular compound in iPP exhibited a maximum. It was shown that the highest value of the mechanical work of adhesion was reached in iPP containing 5 wt.-% of maleic anhydride or sodium maleate and 1 or 7.2wt.-Vo of fatty acids or their salts, respectively. It was found that sodium oleate is the most efficient modifier and its addi- tion increased the mechanical work of adhesion by 6.4 times. ZUSAMMENFASSUNG: Isotaktisches Polypropylen (iPP) wurde in Masse durchZusatzvon niedermolekula- ren Verbindungen wie Maleinsiiureanhydrid, Natriummoleat, Fettsauren oder deren Natriumsalzen und Dibutylphthalat modifiziert. Es wurde festgestellt, daB die Abhiin- gigkeit der mechanischen Adhiisionsarbeit des Systems modifiziertes iPP-Polyvinyl- acetat von der Konzentration der niedermolekularen Stoffe im iPP ein Maximum auf- weist. Das Maximum entspricht dem hochsten Wert der mechanischen Adhisionsar- beit des modifizierten iPP mit einer bestimmten Konzentration an niedermolekularem Zusatzstoff. Es wurde festgestellt, daB der hdchste Wert der mechanischen Adhiisions- arbeit fiir iPP mit 5 Gew.-90 Maleinsiiureanhydrid oder Natriummaleat und 1 oder 1,2 Gew.-90 Fettsduren oder deren Salze gilt. Als wirksamster Modifikator erwies sich Natriumoleat, das die mechanische Adhiisionsarbeit um den Faktor 6,4 erhohte. Introduction In our previous papersl-4, attention was paid to the alteration in adhesive characteristics of isotactic poly(propylene) (iPP) by surface modification using different methods: electric discharge, chemical oxidizers, or water solu- O 1996 Hiithig & Wepf Yerlag, Zug ccc 0003-3146 /96/s07 .00 35