A Comparative Study of Five Reference Materials and the Lombard Meteorite for the Determination of the Platinum-Group Elements and Gold by LA-ICP-MS Sarah Gilbert (1)*, Leonid Danyushevsky (1) , Philip Robinson (1) , Cora Wohlgemuth-Ueberwasser (2) , Norman Pearson (3) , Dany Savard (4) , Marc Norman (5) and Jacob Hanley (6) (1) CODES, University of Tasmania, Hobart, 7001, Australia (2) University of Johannesburg, Auckland Park, 2006, South Africa (3) GEMOC, Macquarie University, Sydney, 2109, Australia (4) Université du Québec à Chicoutimi, Quebec, G7H2B1, Canada (5) Australian National University, Canberra, 0200, Australia (6) St. Mary’s University, Halifax, B3H3C3, Canada * Corresponding author. e-mail: sgilbert@utas.edu.au A range of independently characterised reference materials (RMs) for LA-ICP-MS, used for the determination of the platinum-group elements (PGE) and Au in a sulfide matrix, were analysed and compared: 8b, PGE-A, NiS-3, Po727-T1, Po724-T and the Lombard meteorite. The newly developed RM NiS-3 was used as the RM for the calibration of all LA-ICP-MS analyses and the measured concentrations of the other RMs compared against their published concentrations. This data were also used to assess the consistency of concentrations calibrated against the different RMs. It was found that Po727-T1 and 8b produced results that were comparable, within uncertainty, for all elements. Po727-T1 also produced consistent results with NiS-3 for all elements. All other RMs showed differences for some elements, especially Ru in Po724-T, and Os, Ir and Au in PGE-A. The homogeneity of the PGE and Au in each RM was assessed, by comparing the precision of multiple LA-ICP-MS spot analyses with the average uncertainty of the signal. Po724-T, Po727-T1 and the Lombard meteorite were found to be homogeneous for all elements, but 8b, PGE- A and NiS-3 were heterogeneous for some elements. This is the first direct comparison between a range of independently characterised PGE and Au LA-ICP-MS RMs. Keywords: laser ablation, ICP-MS, platinum-group ele- ments, gold, comparative study. Received 14 Dec 12 – Accepted 16 May 12 Une gamme de matériaux de référence (RM) caractérisés indépendamment pour la technique LA-ICP-MS, utilisée pour la détermination des éléments du groupe du platine (PGE) et l’Au dans une matrice de sulfure, ont été analysés et comparés: 8b, PGE-A, NiS-3, Po727 -T1, Po724-T et la météorite Lombard. Le nouvellement développé RM NiS-3 a été utilisé comme matériau de référence pour l’étalonnage de toutes les analyses LA-ICP-MS et les concentrations mesurées des autres RM comparé à leurs concentrations publiés. Ces données ont été également utilisées pour évaluer la cohérence des concentrations étalonnées par rapport aux différents RM. Il a été constaté que Po727-T1 et 8b ont produit des résultats comparables, dans l’intervalle d’incertitude, pour tous les éléments. Po727-T1 a également produit des résultats cohérents avec NiS-3 pour tous les éléments. Tous les autres RM ont montré des différences pour certains éléments, en particulier pour Ru dans Po724-T, et Os, Ir et Au dans PGE-A. L’homogénéité des PGE et de l’Au dans chaque RM a été évaluée en comparant la précision d’analyses ponctuelles multiples LA-ICP-MS avec l’incertitude moyenne du signal. Po724-T, Po727-T1 et la météorite Lombard apparaissent homogènes pour tous les éléments, alors que 8b, PGE-A et NiS-3 sont hétérogènes pour certains éléments. Il s’agit de la première comparaison directe entre une gamme de matériaux de référence caractérisée de façon indépendante pour les PGE et l’Au pour la technique LA-ICP-MS. Mots-clés : ablation laser, ICP-MS, éléments du groupe du platine, or, étude comparative. Vol. 37 – N° 1 03 13 p.51–64 doi: 10.1111/j.1751-908X.2012.00170.x ª 2012 The Authors. Geostandards and Geoanalytical Research ª 2012 International Association of Geoanalysts 51