International Research Journal of Engineering and Technology (IRJET) e-ISSN: 2395 -0056
Volume: 03 Issue: 10 | Oct -2016 www.irjet.net p-ISSN: 2395-0072
© 2016, IRJET | Impact Factor value: 4.45 | ISO 9001:2008 Certified Journal | Page 550
LIFE SAVING TRANSPORT SYSTEM
Inder Wadhwa
1
, Neerav Dharra
1
, Sahil Chhabria
1
, Srishti Bhandari
1
, Dr. M. Mani Roja
2
,
1Student, Department of Electronics and Telecommunications, Thadomal Shahani Engineering College, PG Kher
Marg, TPS-III, Bandra (West), Mumbai-400 050, India
2Professor, Department of Electronics and Telecommunications, Thadomal Shahani Engineering College, PG Kher
Marg, TPS-III, Bandra (West), Mumbai-400 050, India
---------------------------------------------------------------------***---------------------------------------------------------------------
Abstract - The paper is aimed at DzAccident Preventiondz
using Microcontroller. It is basically a system that uses various
sensors in order to prevent accidents. Looking at the present
scenario there are not many systems available that guarantee
the safety of the driver. The current system focuses on
solutions after the accident has occurred and not before. To
facilitate a feasible solution to this requirement, we have
implemented a system which minimizes the chances of
accidents. To enable this, various sensors are attached which
detects the major causes of accidents.
Key Words: GSM (Global System for Mobile
Communications); GPS (Global positioning system for
location access); Gas Sensor MQ-3; Load cell; Humidity
sensor; Ultrasonic sensor; LCD (Liquid Crystal Display);
Bilateral Switch.
1. INTRODUCTION
Accidents are considered to be a natural disaster striking an
individualǯs life which may lead them to the death path. Even
though there are laws made by the Constitution about
driving there are still many accidents in our country, not
only in our country but all around the world also where
there are different land terrains. For example ghats, slopes
etc. At such places any unpredicted event may occur like an
accident which is fatal no matter whatever the reason is,
India is densely populated and thus transportation takes
place all through the country. As we know about the land
conditions in India it has many different terrains which
makes it more difficult to understand for the driver. As said
earlier due to population traffic in the country is also more.
All these factors and situations are responsible for road
accidents in India. Most of the accidents are of trucks and
buses which have more capacity to accommodate people and
hence more casualties after accidents. All the scenarios
mentioned results only one thing ǮDeathǯ.
Thinking about this major problem we tried to build a
system which itself tries to follow the rules and reduce
accidents. This system tries to cope up with these problems.
The system is designed to prevent from all the possible
situations which may arise while driving. The systems have
been configured to make driving safe and save lives. It has a
system which gives precautionary warnings before accidents
and also prevents it. It also has a system which is made to
save the drivers life after accidents.
1.1 Problems with the old system
Manual wiper adjustment.
No indication for overweight vehicles.
No indication for drunken driving.
No indication for over speeding
No indication for overtaking vehicles.
Response time after accidents is slow, which may
lead to death of the driver and passengers.
1.2 Solutions in the new system
● It reduces the response time after accident.
● It indicates for drunken driver, overweight, over
speed and overtaking vehicles.
● It is cost effective and rugged.
● All vehicle features are fully automatic.
● Reduces probability of human error.
● It can be implemented easily in the current vehicles
without any modifications.
2. BLOCK DIAGRAM
Fig -1: Block diagram of the proposed system