Bakhtavar / Shahriar: Optimal Ultimate Pit Depth considering an Underground Alternative 277 Optimal Ultimate Pit Depth considering an Underground Alternative E. Bakhtavar & K. Shahriar, Amirkabir University of Technology, IR ABSTRACT Many deposits can be mined entirely with surface methods; others must be worked underground from the very beginning. Still other deposits can be mined first as open pits but must be worked underground later. In regard to development of extraction technology and equipment of surface mining in future, the optimal pit depth will increase therefore there is no constant limitation between the two methods in long term. In the combined mining, the most significant question arises: what is the optimal final depth for changing over from surface (Open-Pit) to underground mining? This paper demonstrates a simple new method based upon a two dimensional block model to solve this problem considering future underground mining. The study describes the influence of the optimum ultimate depth of an open pit. In the method, the final main blocks which are take place in the ultimate bench of the pit is divided into some sub-blocks with the values as the main blocks, and the total profit of combined mining as well as optimal final depth of pit were determined. ZUSAMMENFASSUNG Viele Lagerstätten können vollständig im Tagebau abgebaut werden, andere müssen vollständig im Tiefbau gewonnen werden. Wieder andere beginnen als Tagebau und entwickeln sich zum Tiefbau. Da der technische Fortschritt der Gewinnungstechnologie immer größere und tiefere Tagebaue ermöglicht, gibt es auf lange Sicht keine feste Grenze zwischen diesen beiden Bergbauarten. Die wichtigste Frage bei kombiniertem Bergbau ist: welches ist die optimale Teufe um vom Tagebau zum Tiefbau zu wechseln. Dieser Artikel stellt eine neue einfache Methode vor, die auf einem 2- dimensionalen Blockmodel beruht, das zukünftigen Tiefbau berücksichtigt. Die Studie beschreibt den Einfluss auf die optimale Teufe des Tagebaus. Die Methode ist folgende: Die letzten Hauptabbaublöcke, die sich in der Endböschung befinden, werden in Unterblöcke mit den gleichen Werten unterteilt. Dann werden der Gesamtgewinn des kombinierten Bergbaus sowie die optimale Endteufe des Tagebaus bestimmt.