www.hilti.ro Profis Anchor 2.7.5 Input data and results must be checked for agreement with the existing conditions and for plausibility! PROFIS Anchor ( c ) 2003-2009 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan Company: Specifier: Address: Phone I Fax: E-Mail: | Page: Project: Sub-Project I Pos. No.: Date: 1 Garaj Parter 12/17/2017 Specifier's comments: 1 Input data Anchor type and diameter: HST3 M16 hef1 Effective embedment depth: h ef = 65 mm, h nom = 78 mm Material: Evaluation Service Report: Hilti Technical Data Issued I Valid: - | - Proof: Design method Extended STO 36554501-048-2016 Stand-off installation: e b = 0 mm (no stand-off); t = 13 mm Anchor plate: l x x l y x t = 150 mm x 250 mm x 13 mm; (Recommended plate thickness: not calculated Profile: Square hollow; (L x W x T) = 120 mm x 120 mm x 5 mm Base material: cracked concrete, C20/25, R b,n = 18.50 N/mm 2 ; h = 500 mm Installation: hammer drilled hole, Installation condition: Dry Reinforcement: no reinforcement or reinforcement spacing >= 150 mm (any Ø) or >= 100 mm (Ø <= 10 mm) no longitudinal edge reinforcement Geometry [mm] & Loading [kN, kNm]