http://www.iaeme.com/IJMET/index.asp 147 editor@iaeme.com International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 147–157, Article ID: IJMET_09_13_016 Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=13 ISSN Print: 0976-6340 and ISSN Online: 0976-6359 © IAEME Publication Scopus Indexed CHARACTERSATION ANALYSIS OF HARDNESS, IMPACT, WATER ABSORBTION NANO CARBON FIBER REINFORCED POLYMER MATRIX COMPOSITES [NCFRPC] T. Vinod Kumar Assistant Professor, Department of Mechanical Engineering, Vels Institute of Science, Technology and Advanced Studies (VISTAS), Chennai, Tamilnadu, India. M.Chandrasekaran* Professor and Director, Department of Mechanical Engineering Vels Institute of Science, Technology and Advanced Studies (VISTAS), Chennai, Tamilnadu, India. *Corresponding Author ABSTRACT The trend of years has focused the fiber reinforced polymers have removed the conventional and metal materials in the modern engineering. This is more important because of the merits of fiber reinforced polymers over the outcomes materials. Its informly and evaluated in FRPC are light, stiff and allow both large and minimum scale production at minimum cost and however, the strength of these composites are maximum it’s not founded. The performance of the mechanical properties of the expisting FP composites , a minimul amount of Nano carbon powder have been intraduced in the different weight ratios.In this experimental study of nano carbon powder with three different natural fibers of water hyacinth,areca nut and hen feather (0 ,1,2,3,4,5,6 weight % ) Polylactic acid ( Bal weight %) are mixed together and 3 specimens of NCFRP composites were fabricated by using polymer compression injection molding machine. After the fabrication process and specimens to take molding to preapred ASTM standards to evaluted the hardness test and impact strength. KEYWORDS: Mechanical properties, fiber, polymer, nano composites. Cite this Article: T. Vinod Kumar and M.Chandrasekaran, Charactersation Analysis of Hardness, Impact, Water Absorbtion Nano Carbon Fiber Reinforced Polymer Matrix Composites [Ncfrpc], International Journal of Mechanical Engineering and Technology, 9(13), 2018, pp. 147–157 http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=9&IType=13 1. INTRODUCTION Two or more dissimilar polymer composite materials unite together to form a better and sole material. High-temperature creep, impact damage, chemical attack and water absorption are