http://www.iaeme.com/IJMET/index.asp 172 editor@iaeme.com International Journal of Mechanical Engineering and Technology (IJMET) Volume 9, Issue 13, December 2018, pp. 172–181, Article ID: IJMET_09_13_018 Available online at http://www.iaeme.com/ijmet/issues.asp?JType=IJMET&VType=9&IType=13 ISSN Print: 0976-6340 and ISSN Online: 0976-6359 © IAEME Publication Scopus Indexed EVALUATION OF THERMAL AND CHEMICAL PROPERTIES ON NANO CARBON WITH FIBER REINFORCED POLYMER MATRIX COMPOSITES T. Vinod Kumar Assistant Professor, Department of Mechanical Engineering, Vels Institute of Science, Technology and Advanced Studies (VISTAS), Chennai, Tamilnadu, India. M.Chandrasekaran* Professor and Director, Department of Mechanical Engineering Vels Institute of Science, Technology and Advanced Studies (VISTAS), Chennai, Tamilnadu, India. *Corresponding Author ABSTRACT A composite is a combination of two materials in which one of the material, called as reinforcing phase, is in the form of Arecanut fibers, sheets, or particles, and is embedded in the other material called as matrix phase. In general, the current research is focused in blended NCFRPCs which have Three facets one of which is development and another one is an assessment. The one side of the Tri facets is researched by many and now the time has come to investigate the second facet of the composites. In this work, characterization of thermal and chemical resistance is reported. Thermal tests are the tests that are made on water hyacinth filled blend (i.e. system-1) and ArecaNut filled blend reinforced of carbon fiber (i.e. system-2) Hen feather (i.e. system-3) NCFRPCs at different fiber variations viz., 0, 1, 2, 3, 4, 5 and 6 wt. % are presented. Results and discussions are presented based on the type of test and their experimental results and graphs are shown. In all the cases Seven specimens are tested for the sake of accurate results and mean values are computed for drawing graphs. Specifications of the machines are presented. KEYWORDS: Thermal properties, fiber, polymer, nano composites. Cite this Article: T. Vinod Kumar and M.Chandrasekaran, Evaluation of Thermal and Chemical Properties on Nano Carbon with Fiber Reinforced Polymer Matrix Composites, International Journal of Mechanical Engineering and Technology, 9(13), 2018, pp. 172– 181 http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=9&IType=13