http://www.iaeme.com/IJARET/index.asp 329 editor@iaeme.com International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 11, Issue 5, May 2020, pp. 329-340, Article ID: IJARET_11_05_034 Available online athttp://www.iaeme.com/IJARET/issues.asp?JType=IJARET&VType=11&IType=5 ISSN Print: 0976-6480 and ISSN Online: 0976-6499 DOI: 10.34218/IJARET.11.5.2020.034 © IAEME Publication Scopus Indexed DEVELOPMENT AND ANALYSIS OF FRP BASED COMPOSITE FIBRE Vincent H Wilson Professor, Department of Manufacturing Engineering, School of Mechanical Engineering (SMEC), Vellore Institute of Technology, Vellore, India Abhinav Agrawal UG Student, Department of Manufacturing Engineering, School of Mechanical Engineering (SMEC), Vellore Institute of Technology, Vellore, India Akansh Wadhwa UG Student, Department of Manufacturing Engineering, School of Mechanical Engineering (SMEC), Vellore Institute of Technology, Vellore, India Suvansh Chawla UG Student, Department of Technology Management, School of Mechanical Engineering (SMEC), Vellore Institute of Technology, Vellore, India ABSTRACT The current research describes the synthesis and testing of FRP under tensile loading and high temperature conditions. The FRP is produced using Vacuum Infusion technique and cut in to different fibre sizes. The SEM (Scanning Electron Microscope) analysis is performed to determine the effect of matrix maturity, temperature, fibre inclination, and loading rate on fibre matrix. The findings have shown relationship of fibre volume on thermal and mechanical characteristics of FRP. Keywords: FRP, Tensile test, SEM Cite this Article: Vincent H Wilson, Abhinav Agrawal, Akansh Wadhwa, Suvansh Chawla, Development and Analysis of FRP Based Composite Fibre, International Journal of Advanced Research in Engineering and Technology (IJARET), 11(5), 2020, pp. 329-340. http://www.iaeme.com/IJARET/issues.asp?JType=IJARET&VType=11&IType=5 1. INTRODUCTION The rapid growth in manufacturing has resulted in improved strength, toughness, density and lower material costs with improved durability. Composites have emerged as one of those materials that show such an improvement in properties that reveal their potential in a variety of applications. Composites are a fusion of two or more components, one of which is in the