Int J Pharma Res Health Sci. 2020; 8 (3): 3172-78 3172 IIIIIIIII© International Journal of Pharma Research and Health Sciences. All rights reserved DOI:10.21276/ijprhs.2020.03.04 PP Dash and R Raj CODEN (USA)-IJPRUR, e-ISSN: 2348-6465 Review Article A Methodical Review on Industrial Manufacturing and In-process Quality Control of Injectables Pragyandip Parthasarathi Dash*, Ruchika Raj Amity institute of Pharmacy, Amity University, Lucknow, Uttar Pradesh, India. ARTICLE INFO ABSTRACT __ 1. INTRODUCTION In Process Quality Control means the quality check of pharmaceuticals in the time of manufacturing before packaging. It observers all the types of the manufactured goods which affects the quality and constrains liabilities International Journal of Pharma Research and Health Sciences Available online at www.pharmahealthsciences.net Received: 21 May 2020 Accepted: 25 Jun 2020 Corresponding author * Pragyandip Parthasarathi Dash, Asst.Professor, Amity University, Lucknow E-mail: parthasarathi27@gmail.com The foremost aim of pharmaceutical Industry is quality control which is an indispensable section that mention to a procedure of endeavoring to manufacture formulations with stringent measures demanding a systematized effort by single individual of the industry to ensure and reduce the errors in the manufacturing processes. As quality is prime importance part of pharmaceuticals, quality control plays the vital role in achieving it. Quality control includes sampling, testing, validation, documentation and release of procedure which ensure that all tests are actually carried out prior to release of material for sale. Injectable are essentially manufactured in the sterile and aseptic zone where no microbial growth is possible. These are tested under the Quality Control and assured by the Quality Assurance. In-processes quality control assures sterility, freedom from particulate matter, and leakage. stringent procedure are followed for the preparation as well as the quality control test of the injectable to achieve the quality and safety of the product for use .So we became interested about current study to provide the careful orientation of the in process quality control of injectable. Keywords: Validation, Record, Sampling, Quality control, Quality Assurance and GLP (Good Laboratory Practice).