TURBO FILTER APPLIED TO THE POLARIMETRIC RADAR SAR IMAGES Souhila Boutarfa 1 , Lynda Bouchemakh 1 , Youcef Smara 1 U.S.T.H.B, Faculty of Electronics and Computer Science. 1 Laboratory of Image Processing and radiation, BP 32, El-Alia, Bab-Ezzouar, 16111 Algiers, Algeria. E-mail: s.boutarfa@hotmail.fr; lbouchemakh@yahoo.fr; yousmara@yahoo.com KEY WORDS: POLSAR images, speckle filtering, Turbo filter, refined Lee filter, wavelet filtering, SWT. ABSTRACT POLSAR radar images are affected by a granular multiplicative noise called speckle. This noise degrades the quality of these images and makes it difficult to interpret. That is why a polarimetric filtering is necessary. In this paper, our goal is to study a new method of speckle filtering in POLSAR radar images, not only in intensity but also in complex images. This method called Turbo combines two complementary filters: the refined Lee filtering based on the estimation of the minimum mean square error MMSE and the wavelet filtering by using the stationary wavelet transform SWT. One filter can boost up the results of the other. We propose to optimize this method by adding a parameter in the calculation of the threshold in the wavelet filtering using multi-scale edge detection and sum of squared coefficients SSC technique for the wavelet coefficients improvement, this parameter will control the filtering effect and get a good compromise between smoothing homogeneous areas and preserving linear structures. The advantage of this algorithm is to use the advantages of both filters and to obtain images with well reduced speckle. Visual and statistical evaluation and a comparative study are performed to validate the studied methods according to the following criteria: best filtering in terms of smoothing homogeneous areas, preserving edges and conservation of the polarimetric information. RÉSUMÉ Les images radar POLSAR sont affectées par un bruit multiplicatif granulaire appelé speckle. Ce bruit dégrade la qualité de ces images et rend difficile leur interprétation. C’est pour cela qu’un filtrage polarimétrique est nécessaire. Dans cette communication, notre objectif est d’étudier une nouvelle méthode de filtrage du speckle dans les images radar POLSAR, non seulement dans les images en intensité mais aussi dans les images de type complexe. Cette méthode appelée « Turbo », combine deux filtres complémentaires: le filtrage de Lee adaptatif basé sur l'estimation de l’erreur quadratique moyenne minimale (MMSE : Minimum Mean Square Estimation) et le filtrage en ondelettes en utilisant la transformée en ondelettes stationnaire SWT. Chaque filtre peut booster les résultats de l’autre. Nous proposons d'optimiser cette méthode en rajoutant un paramètre au niveau du calcul du seuil dans le filtrage par les ondelettes en utilisant la détection de bords multi-échelles et la technique SSC (Sum