REVIEW Review: carbon nanotube for microfluidic lab-on-a-chip application Chwee-Lin Choong & William I. Milne & Kenneth B. K. Teo Received: 6 April 2008 / Accepted: 6 June 2008 / Published online: 4 July 2008 # Springer/ESAFORM 2008 Abstract Microfluidic lab-on-a-chip allows chemical and biochemical analysis to be conducted in a miniaturized system. Miniaturized analysis reduces the reagent con- sumption while decreasing the overall size of the device, but the small dose of the sample make detection more demanding and is more sensitive to adsorption of species on the surface. Integration of carbon nanotubes into microfludic devices is a promising approach. This review addresses recent advances in the application of carbon nanotubes for microfluidic lab-on-a-chip. The literature review shows that carbon nanotubes have been used to achieve superlubrifying microchannels, act as high density nanoporous membranes, electrical transducers mainly in flow sensors and biosensors, and mimics of living systems. In addition, extensive work has been carried out to investigate the tunable mechanical, chemical and electrical properties of carbon nanotubes in order to manipulate and analyse extremely small volumes of fluid effectively. Keywords Carbon nanotube . Microfluidic . Lab-on-a-chip Introduction Microfluidic systems are designed to handle and manipulate small volume of fluids in microchannels. Today, this technology is finding increasing application, particularly in chemical, biological and medical fields, which leads to a significant reduction in the cost per analysis. The volume of liquid used for one experiment can be reduced by three orders of magnitude by replacing a batch process (process- ing of liquid in wells) into a continuous flow process in microfluidics [17, 20]. One of the long term goals is to integrate this microsystem into lab-on-a-chip devices, where different operations and analysis normally performed in a lab are done on a single microdevice. As these miniaturized analytical systems are used to manipulate and analyse extremely small quantities of fluid with trace amount of targets (e.g. DNA, chemical and cells), great challenges arise in designing the functional elements such as channels, valves, mixers, separation and extraction units, and sensors [5]. Among different micro- and nano-materials, carbon nanotubes have received considerable attention in micro- fluidic application due to their physical electrical and chemical properties. Apart from some common properties desired for other applications such as high surface-to- volume ratio, excellent electrical conductivity, thermal conductivity and mechanical strength, there are several other properties of carbon nanotubes which make them very interesting for microfluidic applications. First, their tubular structure allows liquid to flow either on their outer surface or through the hollow inner core (nanochannel of less than 10 nm diameter pore size), as in Whitby and Quirke [47]. This expands the possibilities to handle small molecular size proteins and biological mole- cules. Further, small liquid droplets are ideal for manipu- lation on dense arrays of carbon nanotubes where only the nanotube tips are in contact with the liquid, minimizing the contact area greatly [26]. Secondly, chemical functionalization of carbon nano- tubes can be used to attach almost any desired chemical species to them in order to enhance the molecular selectivity and biocompatibility of the tubes for a wide Int J Mater Form (2008) 1:117–125 DOI 10.1007/s12289-008-0379-3 C.-L. Choong (*) : W. I. Milne : K. B. K. Teo Electrical Engineering Division, Department of Engineering, University of Cambridge, JJ Thomson Avenue, Cambridge, CB3 0FA, UK e-mail: clc57@cam.ac.uk