LONTAR KOMPUTER VOL. 9, NO. 1, APRIL 2018 p-ISSN 2088-1541 DOI : 10.24843/LKJITI.2018.v09.i01.p01 e-ISSN 2541-5832 Safety Helmet Implementation with Centralized Information System on Remote Monitoring Applications Alvinas Deva Sih Illahi 1 , Anatasya Bella 2 , Sugondo Hadiyoso 3 , Suci Aulia 4 D3 Teknik Telekomunikasi, Telkom Applied Science School,Telkom University Jl. Telekomunikasi Terusan Buah Batu, Bandung, Indonesia alvinas.deva@gmail.com 1 abanatasya@gmail.com 2 sugondo@telkomuniversity.ac.id 3 suciaulia@telkomuniversity.ac.id 4 Abstract Personal Protective Equipment (PPE) is standard equipment that required to ensure safety of workers. PPE equipment that used during work such as: Safety helmet, safety glass, and ear plug. PPE that being used by workers doesn’t informative yet, only serve as personal protective so evacuation prevention still looks difficult to do prior accident happened. In this research, Safety Helmet Project has been implemented with pulse sensor, temperature sensor, carbon monoxide gas sensor, and transmission media which able transmitting data to control and monitoring center. The system also supports multiuser monitoring applications that can be accessed simultaneously through the internet network. Based on test results, the comparison of measurement gap with standard tool has been obtained as temperature sensor is 0,07%, heart sensor is ± 4%. Accuracy level for temperature sensor and heart rate are 99,67% and 95,45% by various condition of test. Another test is delay of the transmitting sensor data to the website around ± 10 seconds and controlling around ± 5 seconds. Keywords: PPE, Safety Helmet, Monitoring, Multiuser, Website. 1. Introduction Occupational Health and Safety (OHS) is one aspect of labor protection and also protecting the company's assets. This is reflected in the Law No. 1 of 1970 on occupational safety. Based on Ministerial Regulation No. PER.08/MEN/VII/2010, every worker must wear Personal Protective Equipment (PPE). PPE is an equipment used to protect workers against occupational health or safety risks such as safety helmets and hard hats, gloves, eye protection, high visibility clothing, safety footwear [1]. Every employer is also required to provide PPE for workers / laborers with specifications in accordance with applicable standards. It aims to reduce the risk of casualty casualties in the workplace, even some studies [2-5] have addressed policy analysis in public health in particular. The PPE used should take into account the potential hazards and risks of the workplace so that it will effectively protect workers. The types of work required to use PPE include: construction, mining, working with chemicals, laboratory work, electrical work, factories or work related to electromagnetic radiation. One of the personal protective equipment for construction, mine, or electrical work is a helmet that generally serves as a protector of [6] falling objects, withstand blows, retains water and fire. Protective helmets commonly used by workers are still protecting the individual personally but have not been able to send the workers condition information to others so that evacuation or early rescue action is difficult to do in the event of an accident so that a smart monitoring system is needed for workers who can reduce the number of accidents and work protection [7-8]. This integrated system should be able to provide an overview of workers' health and workplace environment. This integrated system should be able to provide an overview of workers' health and workplace environment. The system is also capable of reading the parameters that are considered necessary then sending the information to be monitored centrally. The centralized information system is expected to provide ease of access at a much lower cost [9] for interested parties.