International Journal of Mechanical and Industrial Engineering International Journal of Mechanical and Industrial Engineering Volume 4 Issue 2 Article 10 October 2014 ESTIMATING THE EFFECT OF MACHINING PARAMETERS ON ESTIMATING THE EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS DURING MACHINING OF HARDENED SURFACE ROUGHNESS DURING MACHINING OF HARDENED EN24 STEEL USING COATED CARBIDE INSERTS EN24 STEEL USING COATED CARBIDE INSERTS Sudhansu Ranjan Das NIT, Jamshedpur-831014, Jharkhand, India., dassudhansu83@gmail.com Amaresh Kumar NIT, Jamshedpur-831014, Jharkhand, India., amareshnitjsr@yahoo.co.in Debabrata Dhupal VSSUT, Burla-768018, Odisha, India., debabrtadhupal@gmail.com Kali Charan Rath GIET, Gunupur-76502, Odisha, India., kalimtec@gmail.com Follow this and additional works at: https://www.interscience.in/ijmie Part of the Manufacturing Commons, Operations Research, Systems Engineering and Industrial Engineering Commons, and the Risk Analysis Commons Recommended Citation Recommended Citation Das, Sudhansu Ranjan; Kumar, Amaresh; Dhupal, Debabrata; and Rath, Kali Charan (2014) "ESTIMATING THE EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS DURING MACHINING OF HARDENED EN24 STEEL USING COATED CARBIDE INSERTS," International Journal of Mechanical and Industrial Engineering: Vol. 4 : Iss. 2 , Article 10. DOI: 10.47893/IJMIE.2014.1197 Available at: https://www.interscience.in/ijmie/vol4/iss2/10 This Article is brought to you for free and open access by the Interscience Journals at Interscience Research Network. It has been accepted for inclusion in International Journal of Mechanical and Industrial Engineering by an authorized editor of Interscience Research Network. For more information, please contact sritampatnaik@gmail.com.