Product-Service-System Modeling Method Xavier Boucher, Khaled Medini and Hans-Georg Fill Abstract This paper addresses enterprise modeling needs, in a specific field of industrial management: the design and management of industrial product-service-systems. During the last decade, the industrial sector has undergone a change of the business model, through an increasing internalisation of service activities in manufacturing companies. The objective of this chapter is to develop a generic metamodel, which could be used to further develop IT support solutions for the design and lifecycle management of product-service-systems. The specification of this metamodel together with the associated modeling method are explained then illustrated on an industrial case study. Keywords Metamodeling ⋅ Modeling method ⋅ Product-service systems ⋅ Scenarios of product-service-systems ⋅ Manufacturing servitisation 1 Enterprise Modeling Needs, in the Field of Product-Service-Systems The need for a modeling method dedicated to the so-called product-service-systems (PSS) has been directly pushed by changes in the industrial business. During the last decade, the manufacturing industry has undergone a paradigm shift through the development and spread of servitisation and PSS concepts. From the point of view X. Boucher ( ✉ ) ⋅ K. Medini Ecole Nationale Supérieure des Mines de Saint-Etienne, 42023 Saint-Etienne Cedex 2, France e-mail: boucher@emse.fr K. Medini e-mail: khaled.medini@emse.fr H.-G. Fill Research Group Knowledge Engineering, University of Vienna, 1090 Vienna, Austria e-mail: hans-georg.fill@univie.ac.at © Springer International Publishing Switzerland 2016 D. Karagiannis et al. (eds.), Domain-Specific Conceptual Modeling, DOI 10.1007/978-3-319-39417-6_21 455