ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering M. Papadrakakis, V. Papadopoulos, G. Stefanou, V. Plevris (eds.) Crete Island, Greece, 5–10 June 2016 THE ROLE OF THE PRESTRESSED TENDONS ON THE SEISMIC PERFORMANCE OF HYBRID ROCKING BRIDGE BENTS Anastasios I. Giouvanidis 1 , Elias G. Dimitrakopoulos 2 1 Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology Kowloon Bay, Hong Kong e-mail: agiouvanidis@connect.ust.hk 2 Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology Kowloon Bay, Hong Kong e-mail: ilias@ust.hk Keywords: rocking bridges, flag-shaped hysteretic behavior, self-centering, prestressed ten- dons. Abstract. Allowing structural members to uplift and rotate around pre-defined pivot points isolates and relieves the structure from deformation and damage during strong earthquakes. Such rocking behavior has been examined as damage avoidance seismic design for bridges. Rocking structures, either freestanding or hybrid (supplemented with energy dissipation and re-centering devices), have been proposed by several researchers as high-performance sys- tems that can survive major earthquakes without substantial damage. This paper investigates, analytically and numerically, the seismic performance of a hybrid rocking bridge bent which exhibits flag-shaped hysteretic behavior. The rocking frame is enhanced with elastic prestressed central tendons to provide re-centering capacity and hysteretic buckling restrained braces to dissipate energy. The present study examines its seismic behavior under both pulse-type and non-pulse-type ground motions. The focus of the present analysis is on the role of the pre- stressing force on the seismic performance. The results reveal the diverse influence of prestress. Specifically, prestress is beneficial for small rocking rotations, but could become detrimental when the frame sustains large rotations and as the size of the columns increases. Finally, the results reveal the sensitivity of the different rocking design solutions to the characteristics of the considered ground motion. As a consequence, none of the examined rocking frames can be considered as the optimal design solution under all ground motions. 4983