RIDTEM (Riset Diploma Teknik Mesin) Volume I, Nomor 2, Tahun 2018 27 PENGARUH INTENSITAS CAHAYA TERHADAP UNJUK KERJA SOLAR CELL TIPE POLYCRYSTALLINE SILICON KAPASITAS 10 WATT Muhammad Alfan Faizin 1 , Wandi Arnandi 2 , A.Noorsetyo H.D 3 1,2,3 Program Studi Diploma III Teknik Mesin Fakultas Teknik Universitas Tidar muhammadalfanfaizin333@gmail.com, wandiarnandi@untidar.ac.id, noorsetyo@untidar.ac.id Abstrak Penelitian ini mengkaji tentang pengaruh intensitas cahaya terhadap unjuk kerja solar cell tipe polycrystalline silicon kapasitas 10 watt. Berbagai penelitian sebelumnya menunjukkan bahwa unjuk kerja solar cell dipengaruhi intensitas cahaya dan temperatur permukaan panel. Tujuan penelitian ini untuk mengetahui pengaruh intensitas cahaya dan suhu permukaan panel terhadap keluaran tegangan, arus, daya dan efisiensi solar cell. Pengujian ini menggunakan sumber cahaya lampu halogen dengan daya 300, 500 dan 1000 watt secara bergantian selama 33 menit dan dilakukan di ruangan tertutup dari suhu lingkungan luar. Hasil penelitian diperoleh nilai efisiensi tertinggi pada daya lampu 300 watt dengan intensitas cahaya 6600 lux sebesar 17,39% pada suhu permukaan panel ±37,30˚C, dan pada lampu 500 watt dengan intensitas cahaya 12000 lux sebesar 11,08% pada suhu permukaan panel ±41,99˚C, sedangkan pada lampu 1000 watt intensitas cahaya 17800 lux dengan nilai efisiensi sebesar 10,23% pada suhu permukaan panel ±47,30˚C. Kesimpulan dalam penelitian ini bahwa daya keluaran solar cell berbanding lurus dengan intensitas cahaya yang dipancarkan lampu halogen, tetapi seiring bertambahnya waktu dan perpindahan panas dari lampu halogen ke permukaan panel mengakibatkan daya keluaran solar cell mengalami penurunan pada suhu permukaan panel 41˚C sampai 47˚C sedangkan efisiensi solar cell berbanding terbalik dengan intensitas cahaya yang dipancarkan lampu halogen ke permukaan panel. Kata Kunci: intensitas cahaya, suhu permukaan panel, solar cell polycrystalline silicon Abstract This research analyze about impact of the light intensity to work method solar cell of polycrystalline silicon type of 10 watt capacity. Before, there are some research suggests if work method of the solar cell was influenced by light intensity and panel surface temperature. The purpose of this research is to determine affect of light intensity and panel surface temperature of the output of voltage, current, energy and temperature and solar cell efficiency. This research use halogen lamp light source which have 300, 500 and 1000 watt energy alternately until 33 minutes and doing that in closed room from outside tempeture. The results of research are obtained from the highest efficiency values on 300 watt lamp energy with 6600 lux light intensity of 17,39% on ±37,30˚c panel surface temperature and 500 watt the lamp which have 11,08% of 12000 lux light intensity on ±41,99 ˚c panel surface temperature, whereas in 1000 watt lamp of 17800 lux light intensity the efisiensy value is 10,23% on ±47,30 ˚c panel surface temperature. The conclution in this research is the output solar cell energy is directly proportional to the intensity of light emitted by the halogen lamp, but as time goes on and haet transfer from halogen lamp to the panel surface caused output solar cell energy decreases 41˚c untill 47˚c in surface temperature, whereas solar cell efisiensy is inversely proportional to light intensity of light emitted by the halogen lamp from the panel surface. Keywords: light intensity, panel surface temperature, solar cell polycrystalline silicon. PENDAHULUAN Energi adalah kemampuan untuk melakukan kerja (usaha) yang mempunyai satuan joule (J) menurut sistem Internasional. Energi merupakan besaran yang kekal, artinya enegi tidak dapat diciptakan dan dimusnahkan, tetapi dapat diubah dari bentuk satu ke bentuk yang lain. Menurut Arif dan Muji (2009), “energi adalah sesuatu yang dibutuhkan