| ЗБОРНИК РАДОВА ГРАЂЕВИНСКОГ ФАКУЛТЕТА 31 (2017) | 21 SELECTION OF ECONOMIC CROSS-SECTION OF PRECAST REINFORCED CONCRETE PURLINS ИЗБОР ЕКОНОМИЧНОГ ПРЕСЕКА ПРЕФАБРИКОВАНИХ АРМИРАНОБЕТОНСКИХ РОЖЊАЧА Danica Goleš 1 erđ Varju 2 Oliver Vajda 3 UDK: 624.012.35.03:658.7.03 DOI: 10.14415/zbornikGFS31.002 CC-BY-SA 4.0 license Summary: The selection of the cross section of precast reinforced concrete (RC) purlins is performed in the function of their span and load, while the spacing of these elements is chosen according to the bearing capacity and deformability of the roof cover. This paper presents an analysis of the consumption and price of the materials for the production of precast RC purlins of 6.0 m span for different spacing, shapes and dimen- sions of the cross section, aiming to achieve the minimum total cost of materials for production of the purlins of a two-bay hall, with meeting the requirements of resistance, service- ability and durability. Keywords: Precast reinforced concrete purlins, economical shape, material consumption 1. INTRODUCTION The most important condition which, from the aspect of the constructor, one structure should fulfill is its reliability. On the other hand, a demand that, in addition to its functionality, is of the greatest interest for the investor is its Резиме: Избор попречног пресека префабрикованих АБ рожњача врши се у функцији њиховог распона и оптерећења, док се размак ових елемената бира према носивости и деформабилности кровног покрива- ча. У раду je приказанa анализa утрошка и цене материјала за израду префабрикованих АБ рожњача рас- пона 6.0 m, за различите размаке, облике и димензије попречног пресека, чији је циљ био постизање минималне укупне цене материјала за извођење рожњача једне дво- бродне хале, уз испуњење захтева носивости, употребљивости и трај- ности. Кључне речи: Префабриковане армиранобетонске рожњаче, еконо- мичан облик, утрошак материјала 1. УВОД Најважнији услов који, са аспекта конструктера, треба да испуни једна конструкција је њена поузданост. Са друге стране, захтев који, поред функционалности, највише занима инвеститора је економичност, која се 1 Danica Goleš, PhD, Assistant Professor, University of Novi Sad, Faculty of Civil Engineering Subotica, Kozaračka 2a, Subotica, Serbia, tel: +381 24 554 300, e – mail: dgoles@gf.uns.ac.rs 2 erđ Varju, MSc, University of Novi Sad, Faculty of Civil Engineering Subotica, Kozaračka 2a, Subotica, Serbia, tel: +381 24 554 300, e – mail: varjugy@gf.uns.ac.rs 3 Oliver Vajda, Civ. Eng., student of Master studies at University of Novi Sad, Faculty of Civil Engineering Subotica, Kozaračka 2a, Subotica, Serbia, tel: +381 24 554 300, e – mail: voliver1993@gmail.com