© 2018 JETIR August 2018, Volume 5, Issue 8 www.jetir.org (ISSN-2349-5162) JETIRA006206 Journal of Emerging Technologies and Innovative Research (JETIR) www.jetir.org 1191 STRUCTURAL AND TAILORED OPTICAL PROPERTIES OF GOLD COATED SILICA (SIO 2 @AU) NANOPARTICLES Uma Pachauri, P. S. Rawat, Deepika P. Joshi Department of Physics, GBPUA&T Pantnagar, Uttarakhand ABSTRACT-In the present work the optical properties of gold coated silica nanoparticles (SiO2@Au) were discussed. Mono- dispersed silica nanoparticles were synthesized by Stober process and gold nanoparticles were synthesized by citrate reduction method. The evolution of gold-coverage over the surface of functionalized silica particles were demonstrated via tunneling electron microscopy (TEM), FTIR and UV-Visible spectroscopy for morphological and optical study. The study suggested that surface plasmon resonance absorption spectra from 350 nm to 600 nm of the core–shell nanoparticles can be effectively controlled and tuned by the surface gold coverage or by the size of SiO2@Au core-shell nanoparticles. Keywords-Core-Shell nanoparticles, Silica nanoparticles, Gold nanoparticles, UV-Vis spectroscopy. INTRODUCTION Diversebehaviour ofnanomaterials is due to surface effects and quantum confinement effect.The chemical reactivity and mechanical, dielectric, optical, electric, magnetic properties are affected by thesefactors. Gold nanoparticles are used to tune the properties of metal nanoparticles widely in the last few years. Gold nanoparticles (Au Nanoparticles) can be synthesized by the reduction of chloroaurate ions (AuCl4 - ) using different chemicals (using sodium borohydrate, citrate and other reducing agents) and physical (UV radiation, ultrasonication, radiolysis and thermal treatments) processes. Stabilizing agents such as thiols, amines, phosphines, phosphine oxides and carboxylates are used to control the shape and size of the particles [1-8]. When a dielectric core is coated with metal, the plasmonresonance mechanism shows a proper change in spectrum. The wavelength of appearing in the spectrum depends on the ratio of coating thickness to core size. The application of gold nanoshellsare of great interest in the biomedical field, as diagnostic and therapy research studies that include optical labeling for tumor cell imaging, controlled drug delivery, and plasmonicphotothermal therapy [9-10]. In the present study we have investigated the growth and attachment of small metal gold nanoparticles to the functionalized surface of larger silica nanoparticles. Nearly monodispersed silica particles and gold nanoparticles were prepared by sol–gel method. The size of the particle could be altered by changing the concentration of reactants, temperature and the reaction time. The nano core-shell particles prepared by the above method were studied for their optical properties using UV–Vis spectroscopy and the morphological study was done by transmission electron microscopy (TEM) and FTIR. Materials and Methods Pure and analytical grade chemicals were used in all experiments including synthesis of gold, silica and gold coated silica nanoparticles. Silica nanoparticles were synthesized by using the Stöber method [11].In brief, ethanol, distilledwater, and ammonium hydroxide (NH4OH) were mixed in a round-bottom flask and stirred at room temperature for ~30 min. To this solution, tetraethylorthosilicate (TEOS) was added and the solution was further stirred for 3 h. A white precipitate was obtained which was thoroughly washed with ethanol and then dried. By varying the concentration of NH4OH and TEOS, we can vary the size of the monodispersed silica nanoparticles. Functionalization of silica nanoparticles was done by using APTES in C2H5OH/H2O (3:1volume ratio) and adding silica particles to it with APTES/silica ratio as 2.3:1 (w%). The resulting solution was vigorously stirred at 80°C for 12 h. The solution was centrifuged, and the precipitate was washed with water to get functionalized silica particles. Gold nanoparticles were synthesized by the citrate reduction of HAuCl4.3H2O. In brief, 10 ml of HAuCl4 (0.002 M) was boiled at 80 0 C for 30 min. A freshly prepared trisodiumcitrate (10 ml, 0.01 M) was added drop wise to the mixture with constant stirring. The solution changed from colourless to a deep wine red colour.For the synthesis of gold coated silica nanoparticles, 0.2 gm functionalized silica powder was transferred into a round bottom flask, 50 ml C2H5OH and 0.5 ml gold particle solution was added drop wise into the flask. Then the mixture was vigorously stirred and heated for 30 minutes. After this, the solution was allowed to settle down and the supernatant solution was then discarded carefully. The remaining solution was centrifuged at 12,000 rpm for 10 min and the supernatant was discarded. The prepared gold nucleated nanoparticles were washed and dried to get gold nucleated light red coloured particles. The prepared nanoparticles were washed and centrifuged three times using distilled water. The coating process was carried out several times for full coating of silica core by gold nanoparticles shell. Results and Discussion Ammonia-catalyzed reactions of TEOS with water in alcohols (Stöber synthesis) were used for the preparation of monodispersed, spherical silica nanoparticles. White silica nanoparticles were functionalized to attach the gold nanoparticles on it by using the bi-functional organic solvent 3-aminopropyltriethoxysilane (APTES). The gold metal has very little affinity for silica, and it does not form the passivating oxide film in solution, hence silane coupling agent was used as surface primer. The