Journal of Characterization Vol 1, Special Issue, 62-69, December 2021 Copyright © 2021 JCHAR ISSN: 2757-9166 Research Article https://jcharacterization.com https://jcharacterization.org 62 Dry Grinding of Bentonite by Stirred Media Mill Hakan Çiftçi 1* , Melih Özçatal 2 1 * Afyon Kocatepe University, Faculty of Engineering, Department of Mining Engineering, Afyonkarahisar, Turkey, (ORCID: 0000-0001-7910-7350), hakanciftci86@gmail.com 2 Afyon Kocatepe University, Faculty of Technology, Department of Metallurgical and Materials Engineering, Afyonkarahisar, Turkey, (ORCID: 0000-0002-0831-9038), mozcatal@aku.edu.tr (Received date: 28.12.2021 and Accepted date: 30.12.2021) (DOI: 10.29228/JCHAR.55663) REFERENCES: Hakan, Ç., Melih, Ö., Dry grinding of bentonite by stirred media mill, Journal of Characterization, (1), Special Issue, 62-69, 2021. Abstract In this study, a pin-type vertical stirred media mill was used to perform the dry grinding of bentonite. Grinding time and stirring speed were investigated for effect on the particle size distribution and energy consumption (Ec), while ball charge and bentonite charge were kept constant as 60% and 40%, respectively. It was observed that raw bentonites could be ultra-fine dry ground using vertical stirred media mills for the potential dry uses of bentonites. The experimental results revealed that a ground bentonite product having a d80 value of about 10 µm was obtained with 128.1 kWh/ton energy consumption. Optimum operational parameters were selected as 60% ball charge, 40% bentonite charge, 600 rpm stirring speed, and 20 min grinding time. Keywords: Bentonite, Montmorillonite, Grinding, Stirred media mill. Bentonitin Karıştırmalı Ortam Değirmeni ile Kuru Öğütülmesi Öz Bu çalışmada bentonitin kuru öğütülmesi için pim tipi dikey karıştırma ortamlı değirmen kullanıldı. Tane boyutu dağılımına ve enerji tüketimine (Ec) etkisi için öğütme süresi ve karıştırma hızı araştırılırken bilye ve bentonit şarj oranı sırasıyla %60 ve %40 olarak sabit tutuldu. Bentonitlerin potansiyel kuru kullanımları için ham bentonitlerin dikey karıştırmalı öğütücüler kullanılarak ultra ince kuru öğütülebildiği gözlemlendi. Deneysel sonuçlar, 128.1 kWh/ton enerji tüketimi ile yaklaşık 10 µm d80 değerine sahip öğütülmüş bentonit ürününün elde edildiğini ortaya koydu. Optimum çalışma parametreleri %60 bilye şarjı, %40 bentonit şarjı, 600 rpm karıştırma hızı ve 20 dk öğütme süresi olarak seçildi. Anahtar Kelimeler: : Bentonit, Montmorillonit, Öğütme, Karıştırmalı ortam değirmeni.