G e op hy sical Pr o sp e cting, 1996, 44, 761 -7 87 Application of acoustic full wavetrains for the determination of lithology, reservoir and mechanical parameters of formationl Maria Bala2and Jadwig a Jarzyna2 Abstract The significant development in acoustic full waveform logging during the last ten years has made it increasingly possible for log analysts to determine the physical properties of a rock formation in situ. Parallel to the methods applied to a single wavetrain during seismic processing,the new techniques, used for sets of wavetrains, have been successfully tested with acoustic full waveforms. Instantaneous characteristics analysis is included in this group of methods. This approach, leading to qualitative and quantitative interpretation, reveals the influence of small changes in physical properties on acoustic full wavetrains. Applications of complex acoustic waveform analysis for the determination of inhomogeneous zones are presented. Colour diagrams of instantaneous character- istics are used for the detection of fractured reeions and slow formations with increased attenuationof acousticwaves. Results of the interpretation of individual acoustic full waveforms, based on cross- correlation and spectral analysis, using the IDNP and IDNS computer programsJ e.g. velocities of compressional waves, shear and Stoneley waves, are presented. Since the bulk density of the rocks was known, it was possible, using the velocities of P- and S-waves obtained, to calculate the dynamic elastic moduli. We used the interpretation of acoustic full wavetrains to calculate porosity. The sonic porosity is compared to the porosity obtained from other logs and to that obtained from core sample analysis. The examples of acoustic full wavetrains were recorded in the Miocene sulphur- bearing limestones in central Poland. Field measurements were made using the domestic prototype equipment for well log recordings in shallow boreholes. t Paper presented at the 56th EAEG meeting, June 1994, Vienna, Austria. Received August 1994, revision accepted January 1996. 2Institute of Geophysics, University of Mining and Metallurgy, 30-059 Krakow, al. Mickiewicza 30, Poland iO 1996 European Association of Geoscientists & Engineers 761