Available online at www.sciencedirect.com ScienceDirect Materials Today: Proceedings 4 (2017) 6948–6953 www.elsevier.com/locate/procedia 2214-7853 © 2017 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the Conference Committee Members of NANOTEXNOLOGY2016 (13th International Conference on Nanosciences & Nanotechnologies & 9th International Symposium on Flexible Organic Electronics). 13th International Conference on Nanosciences & Nanotechnologies & 9th International Symposium on Flexible Organic Electronics Synthesis, processing and characterization of FeMnGa nanoparticles for permanent magnet applications G. Sempros a,* , K. Kanari a , C. Sarafidis a , M. Gjoka b , N. Lupu c , G. Ababei c , D. Niarchos b , O. Kalogirou a a Dept. of Physics, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece b Institute of Nanoscience and Nanotechnology, NCSR “Demokritos”, Athens, Greece c National Institute of R&D for Technical Physics, 47 Mangeron Blvd., 700050 Iasi, Romania Abstract In recent years, there is a great demand in materials suitable for permanent magnets which led to shortages in the supply of rare earth elements, a basic ingredient of high performance magnets. Research for rare earth free magnetic materials is considered as a viable alternative. Various Heusler alloys are investigated as possible candidates. Among them, the binary compound Mn X Ga has gained interest. A method of improving the magnetic properties of intermetallic compounds is the introduction of a magnetic atom like Fe in replacement of a 3d metal, in our case, by replacing a quantity of Mn with Fe. In this study Mn 0.4 Fe 0.3 Ga 0.3 alloys were prepared in a high purity Ar atmosphere with the arc-melting technique followed by melt-spinning in order to get nanostructured ribbons. The samples were further treated (annealing, ball milling) in order to tune the microstructure and obtain single phase samples with optimum magnetic properties. Magnetization measurements were performed by using a Vibrating Sample Magnetometer (VSM), versus temperature and field. The structure of the samples was observed with the X-Ray Diffraction Patterns (XRD). The L1 2 structure was observed for the first time, among the other ones D0 19 and L2 1 which are already observed in Mn 3 Ga studies. A deeper observation was performed with a Scanning Electron Microscope (SEM). Saturation magnetization of the basic material was measured at 81.4 Am 2 /kg while remanence and coercive field were low. The effect of the grain size on the magnetic properties, due to ball milling, is presented. © 2017 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the Conference Committee Members of NANOTEXNOLOGY2016 (13th International Conference on Nanosciences & Nanotechnologies & 9th International Symposium on Flexible Organic Electronics). Keywords: Ball milling; magnetic properties; intermetallic compound *corresponding author: gsempros@physics.auth.gr