* Phd. Eng. Krzysztof Gromysz, Department of Building Structures, Silesian Technical University. KRZYSZTOF GROMYSZ * DISSIPATIVE FORCES IN JOINT SURFACE OF COMPOSITE REINFORCED CONCRETE FLOORS SIŁY ROZPRASZAJĄCE ENERGIĘ W ZESPOLENIU ŻELBETOWYCH STROPÓW WARSTWOWYCH Abstract It is assumed that longitudinal shearing in joint surface (interface) of composite foors is bal- anced by: elastic forces, force of cohesion and kinetic friction. Moreover, internal friction oc- curs in the interface. Due to their nature, not all the above mentioned phenomena occur at the same time; however they are together responsible for deformation of interface. The paper dis- cusses dissipative forces (non elastic). An interface model is built and test results of six foors are presented. All slabs are the same size – 3 m span and 0.6 m width and 0.18 m high. All slabs have the same longitudinal reinforcement. There are four types of join surface tested: smooth, very smooth, with eliminated adhesion and indented. Keywords: Composite foor, concrete structures, dissipative forces Streszczenie Przyjęto, że siły podłużnego ścinania w płaszczyźnie zespolenia żelbetowych stropów war- stwowych są równoważone przez: siły sprężyste, kohezję oraz tarcie kinetyczne. Ponadto w zespoleniu pojawia się tarcie wewnętrzne. Ze względu na swoją naturę nie wszystkie siły wywoływane są równocześnie, jednakże wspólnie odpowiadają za obserwowane odkształce- nia w zespoleniu. W artykule zrelacjonowano badania sześciu płyt, które cechowały się takimi samymi wymiarami – rozpiętość 3 m, szerokość 0,6 m, wysokość 0,18 m i taką samą ilością zbrojenia przęsłowego. W płytach zastosowano cztery rodzaje powierzchni zespolenia: gładką, bardzo gładką, z usuniętą przyczepnością oraz z wrębami. Słowa kluczowe: stropy zespolone, konstrukcje żelbetowe, siły rozpraszające energię TECHNICAL TRANSACTIONS CIVIL ENGINEERING 1-B/2013 CZASOPISMO TECHNICZNE BUDOWNICTWO