Δελτίο της Ελληνικής Γεωλογικής Εταιρίας, τομ. XLVII , 2013 Πρακτικά 13 ου Διεθνούς Συνεδρίου, Χανιά, Σεπτ. 2013 Bulletin of the Geological Society of Greece, vol. XLVII 2013 Proceedings of the 13 th International Congress, Chania, Sept. 2013 CHARACTERIZATION OF A NEW LABORATORY CERAMIC PRODUCT FROM INDUSTRIAL BY-PRODUCTS AS RAW MATERIALS AND CAUSTIC MAGNESIA AS ADDITIVE Skliros V. 1 , Lampropoulou P.G. 1 , Tsikouras B. 1,2 , Hatzipanagiotou K. 1 , Christogerou A. 3 and Angelopoulos G.N. 3 1 University of Patras, Department of Geology, Section of Earth Materials, 265 00, Patras, Greece sklirosbill@gmail.com, p.lampropoulou@upatras.gr, v.tsikouras@upatras.gr, k.hatzipanagiotou@upatras.gr 2 University of Brunei Darussalam, Department of Petroleum Geoscience, Jalan Tungku Link, Gadong BE1410, Bandar Seri Begawan, Brunei Darussalam 3 University of Patras, Department of Chemical Engineering, Laboratory of Materials and Metallurgy, 265 00 Patras, Greece, angiechristo@chemeng.upatras.gr, angel@chemeng.upatras.gr Abstract A new ceramic product is introduced by mixing caustic magnesia, produced in the laboratory from pure, high quality magnesite, and natural silt. Bottom ash and red mud, two well known environmentally hazardous industrial by-products, were also added in the mixture. After testing various recipes we concluded that addition of 5% caustic magnesia in the ceramic product greatly enhances its performance. Increase bonding of the ceramic microstructure is attributed to the formation of periclase necks, the concurrent formation of small quantities of amorphous material and the homogeneously distributed pores during the experimental firing of the mixture. Combined X-ray Diffractometry and Scanning Electron Microscopy of the ceramic product revealed the occurrence of unreactive phases, inherited by the raw materials, as well as newly-formed albite and magnesioferrite. Our results show that utilization of by-products may be important and environmental friendly materials in producing low cost ceramic building materials. Keywords: ceramics, caustic magnesia, by-products, red mud, bottom ash. Περίληψη Στην εργασία αυτή παρουσιάζεται ένα νέο κεραμικό προϊόν που παράχθηκε από μίξη καυστικής μαγνησίας, που παρασκευάστηκε εργαστηριακά από υψηλής καθαρότητας μαγνησίτη, φυσικού πηλού καθώς και τέφρας πυθμένα και ερυθράς ιλύος, προϊόντα γνωστά για τις δυσμενείς περιβαλλοντικές επιπτώσεις τους. Έπειτα από δοκιμή ποικίλων συνταγών, συμπεράναμε ότι προσθήκη 5% καυστικής μαγνησίας στο κεραμικό προϊόν βελτιώνει τις μηχανικές επιδόσεις του. Αυτό αποδίδεται στο γεγονός ότι το περίκλαστο της καυστικής μαγνησίας σχηματίζει «λαιμούς», οι οποίοι ισχυροποιούν τους δεσμούς στη μικροδομή του κεραμικού, σε συνδυασμό με τον ταυτόχρονο σχηματισμό μικρών ποσοτήτων άμορφου υλικού και την ομοιογενή κατανομή των πόρων, που δημιουργούνται κατά την όπτηση. Με συνδυαστική μελέτη Περιθλασιμετρίας Ακτίνων Χ και Σαρωτικού Ηλεκτρονικού Μικροσκοπίου του XLVII, No 3 - 2050