65 Jurnal Ilmiah Mahasiswa Kendali dan Listrik Vol. xx, No. xx, Mounth 2020, page-page. xx~xx E-ISSN: 2723-598X DOI: https://doi.org/10.33365/jimel.v1i1 available online at: http://jim.teknokrat.ac.id/index.php/teknikelektro/index SISTEM KENDALI OTOMATIS PADA PINTU PERLINTASAN KERETA API Ahmad Hermawan 1 , Sampurna Dadi 2 , Ahmad Jayadi 3 1 Fakultas Teknik dan Ilmu Komputer. Universitas Teknokrat Indonesia) 2 Fakultas Teknik dan Ilmu Komputer. Universitas Teknokrat Indonesia 3 Fakultas Teknik dan Ilmu Komputer. Universitas Teknokrat Indonesia Email: ahmadhermawan@gmail.com 1 , sampurna.go@teknokrat.ac.id 2 , ahmadjayadi@teknokrat.ac.id 3 Received: (date month year) Accepted: (date month year) Published : (date month year ) Abstract In making this simulation, the writer aims to design a system to facilitate the work of operating crossroad latches and aisle lights on railroad tracks which sometimes still require personnel, so it often occurs due to negligence in operating them which causes accidents on the railroad crossing. For this reason, researchers designed an automatic control system at railroad crossings using a weight sensor system which is expected to help streamline the operation of railroad crossings. The way this tool works is by utilizing Arduino microcontroller, Infrared sensor and Ultrasonic sensor as data input. The way this prototype works is the Load Cell sensor whose function is to activate the Infra Red 1 sensor to provide input when a train passes and the crossing gate will open, and the Infra Red2 sensor will close the crossing latch when the train has passed the crossing and give a message of thanks has obeyed traffic. When a train enters the hallway, the Ultrasonic sensor will turn on, controlling the led to adjust the train's passing by repetitive work processes . Keywords: Arduino, Lcd , Sensor Infrared, Sensor Ultrasonic, Sensor Load Cell Abstrak Dalam Pembuatan simulasi ini penulis bertujuan untuk merancang sebuah sistem dalam memudahkan pekerjaan dalam mengoprasikan palang pintu perlintasan dan lampu lorong pada rel kereta api yang terkadang masih memerlukan tenaga pegawai sehingga sering terjadi karena kelalaian dalam mengoprasikannya yang menyebabkan kecelakaan di jalur perlintasan kereta api. Untuk itu peneliti melakukan perancangan terhadap sistem kendali otomatis pada perlintasan kereta api menggunakan sistem sensor berat yang diharapkan bisa membantu mengefisienkan dalam mengoprasikan palang pintu perlintasan kereta api. Cara kerja alat ini yaitu dengan memanfaatkan mikrokontroler arduino, sensor Infrared dan sensor Ultrasonic sebagai pemberi inputan data. Cara kerja prototipe ini yaitu sensor Load Cell yang fungsinya mengaktifkan sensor Infra Red 1 untuk memberi inputan saat kereta api melintas dan palang pintu perlintasan akan membuka, dan sensor Infra Red2 akan menutup palang pintu perlintasan saat kereta api sudah melewat palang pintu perlintasan dan memberi pesan terimakasih telah mematuhi lalu lintas. Ketika kereta api memasuki lorong sensor Ultrasonic akan menghidupkan, mengontrol led menyesuaikan jalannya kereta api yang melintas dengan proses kerja berulang-ulang Kata Kunci: Arduino, Lcd , Sensor Infrared,Sensor Ultrasonic, Sensor Load Cell To cite this article: Authors. (Year). Title of the article. Jurnal Ilmiah Mahasiswa Kendali dan Listrik, Vol(1), Page-Page.