PROCEEDINGS, Thirty-First Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, January 30-February 1, 2006 SGP-TR-179 STRESS AND FAULTING IN THE COSO GEOTHERMAL FIELD: UPDATE AND RECENT RESULTS FROM THE EAST FLANK AND COSO WASH Nicholas C. Davatzes and Stephen H. Hickman Earthquake Hazards Team U.S. Geological Survey Short address Menlo Park, CA 94025 e-mail: ndavatzes@usgs.gov ABSTRACT We integrate new geologic mapping and measurements of stress orientations and magnitudes from wells 34-9RD2 and 58A-10 with existing data sets to refine a geomechanical model for the Coso geothermal field. Vertically averaged stress orientations across the field are fairly uniform and are consistent with focal mechanism inversions of earthquake clusters for stress and incremental strain. Active faults trending NNW-SSE to NNE-SSW are well oriented for normal slip in the current stress field, where the mean S hmin orientation is 108° ± 24º in a transitional strike-slip to normal faulting stress regime. These structures bound regions of intense micro-seismicity and are complexly associated with surface hydrothermal activity. WNW-ESE trending faults are also associated with distinct regions of enhanced seismicity but are only associated with surface hydrothermal activity where they intersect more northerly trending normal faults. These faults show no evidence for Quaternary slip at the surface and are poorly oriented in the modern stress field. These results together with stress magnitudes measured in the East Flank of the field suggest that the most productive portions of the Coso geothermal field are in stress environments conducive to normal faulting. In addition, significant horizontal principal stress rotations are recorded by drilling-induced structures in borehole image logs. These variations in the azimuth of induced structures suggest local stress heterogeneity induced by active fault slip and are consistent with the high rates of seismicity observed in the geothermal field. This geomechanical model provides a first step in studying the mechanical interactions and permeability of fault zones, their natural evolution, and their response to engineered stimulation. In addition, this model is a critical element of the stimulation strategy that will be applied to Enhanced Geothermal Systems (EGS) well 46A-19RD in the southwest portion of the geothermal field in 2006. 1. INTRODUCTION Fluid flow in low porosity crystalline rock is largely controlled by connected networks of faults and fractures within the rock mass. However, the permeability of these fracture networks is degraded by alteration and mineral precipitation that accompanies fluid flux across changing temperature, pressure, and chemical gradients. In natural systems, recurrent brittle deformation and frictional failure can regenerate permeability lost to these processes through dilation accompanying slip on rough fracture surfaces, brecciation, and the formation of new fractures. Mismatch between fracture surfaces and rotation of breccia clasts create connected porosity that persists after a slip event. In tectonically active geothermal systems, these mechanisms can be intentionally activated by increasing the fluid pressure at depth to induce shear failure and create new permeability in formerly inaccessible hot rocks. By exploiting existing networks of fractures, we hope to maximize the lateral extent, surface area, and depth of the stimulated fracture network to most efficiently mine heat from the subsurface. The Coso geothermal field (CGF) is a prime candidate for creating such an Enhanced Geothermal System (EGS). The geothermal field is rooted in highly fractured granitoid rocks that display temperatures greater than ~640°F at depths less than 10000 ft. Permeability is variable and several hot regions currently display extremely low permeability. However, high rates of seismicity in the field demonstrate that it is highly stressed and susceptible to stimulation by shear failure. In this study, we assemble a geomechanical model that includes the geometry of the fault system and the stress state driving deformation in the Coso geothermal field. This model provides a necessary first step in creating a viable and successful stimulation strategy for the new EGS well 46A-19RD, and key information necessary to transfer successful elements of the strategy to other locations.