ISSN 1019-1011 Ç.Ü.J.FAC.ENG.ARCH. VOL.23 NO.1 DOĞRU EKSENLĐ KOMPOZĐT ÇUBUKLARIN DĐNAMĐK ANALĐZĐ Mehmet KIRAÇ ve Faruk Fırat ÇALIM M.K.Ü., Đnaat Mühendisliği Bölümü, Hatay/Türkiye Beytullah TEMEL Ç.Ü., Đnaat Mühendisliği Bölümü, Adana/Türkiye ÖZET : Kompozit doğru eksenli çubukların zamanla değien yükler altındaki dinamik davranıı Laplace uzayında teorik olarak incelenmitir. Formülasyonda, malzeme anizotropisi, dönme ataleti, eksenel ve kayma deformasyonu etkileri göz önüne alınmıtır. Çubuk malzemesi homojen, lineer elastik ve anizotropik kabul edilmitir. Laplace uzayında elde edilen skaler formdaki adi diferansiyel denklemler, problemin dinamik rijitlik matrisini hesaplamak için tamamlayıcı fonksiyonlar yöntemi kullanarak sayısal olarak çözülmütür. Elde edilen çözümler, uygun bir sayısal ters Laplace dönüüm yöntemi ile zaman uzayına dönütürülmektedir. Serbest titreim zorlanmı titreimin özel hali olarak alınmıtır. Bu çalımada elde edilen sonuçların literatür ve ANSYS sonuçları ile uyum içinde olduğu görülmütür. DYNAMIC ANALYSIS OF STRAIGHT COMPOSITE RODS ABSTRACT : The dynamic behavior of composite straight rods subjected to time- dependent loads is theoretically investigated in the Laplace domain. The anisotropy of the rod material, effect of the rotary inertia, axial and shear deformations are considered in the formulations. The material of the rod is assumed to be homogeneous, linear elastic and anisotropic. Ordinary differential equations in scalar form obtained in the Laplace domain are solved numerically using the complementary functions method to calculate the dynamic stiffness matrix of the problem accurately. The solutions obtained are transformed to the time space using an appropriate numerical inverse Laplace transform method. The free vibration is then taken into account as a special case of forced vibration. The results obtained in this study are found to be in a good agreement with those available in the literature and ANSYS. 275 Haziran June Ç.Ü.MÜH.MĐM.FAK.DERGĐSĐ CĐLT.23 SAYI.1 2008