1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 1 Oxygen permeation in symmetric and asymmetric La 0.2 Sr 0.8 Fe 0.8 Ta 0.2 O 3-G membranes Jonas Gurauskis ‡  , Ørjan Fossmark Lohne, Dan Stræte Lagergren, Espen Tjønneland Wefring, Kjell Wiik  . Department of Materials Science and Engineering, Norwegian University of Science and Engineering, Sem Sælandsvei 12, NO-7491, Trondheim, Norway. Abstract La0.2Sr0.8Fe0.8Ta0.2O3-G (LSFT) is a mixed ionic electronic conductor (MIEC) at elevated temperatures and as such a candidate material for applications both in syn-gas synthesis and as electrodes in solid oxide fuel cells (SOFC). This study addresses the variation in oxygen permeation rates for LSFT symmetric- and asymmetric-membranes at temperatures between 800 and 1000 o C with and without surface modification. The surface was strutured in two different scales, macro (porous LSFT-layer) and micro (acid etching). The asymmetric membranes showed a significant variation in permeation rate with surface treatment with increasing rate in the sequence from non-treated to macro-structured and finally micro structured, corresponding to oxygen permeation being controlled by surface exchange and gas diffusion. It was found that the permeation rate was sensitive to the gas sweep rate when H2-mixtures was introduced on the permeate side, which was rationalized by adsorption of H2O-molucules on the surface hampering the exchange of oxygen. Keywords: Oxygen permeation, perovskite, asymmetric membrane, surface modification, stability. ‡ Current address: Department of Energy Conversion and Storage, Technical University of Denmark, Frederiksborgvej 399, 4000 Roskilde, Denmark. - Corresponding authors: kjell.wiik@ntnu.no (+47 73594082), jogu@dtu.dk (+45 24649403). *Manuscript Click here to view linked References