Sajjad Hassan et al., J.Chem.Soc.Pak., Vol. 43, No. 03, 2021 289 Synthesis and Applications of Polyacrylate based Water White Clear Polymeric Material Fortified with Carbon Nanotubes for Durable, Protective and Corrosion Resistance Coatings Used in Applied Automobile Industry 1 Sajjad Hassan, 1 Mirza Nadeem Ahmad, 2,3 Phool Shahzadi*, 4 Muhammad Naeem Khan**, 1 Muhammad Naveed Anjum and Muhammad Jawwad Saif 1 Department of Applied Chemistry, Government College University, Faisalabad. 2 Department of Applied Chemistry, UET, Lahore. 3 Glass and Ceramics Research Center, PCSIR, Laboratories Complex, Lahore. 4 Department of Chemistry, Govt. College of Science, Wahdat Road, Lahore. Psk_a@yahoo.com** (Received on 30 th July 2020, accepted in revised form 28 th December 2020) Summary: Acrylates are esters of acrylic acid formed by the reaction of acrylic acid with alcohols. These acrylic esters were produced by polymerization of combination with different acrylic monomers to produce the materials with enhanced characteristics for coating applications. The acrylate-based polymers were prepared by varying the nature and ratios of the monomers. Moreover, the properties of the polymeric materials were further improved by compositing with the nano-fillers i.e. carbon nanotubes. Further, the materials were coated on different surfaces to evaluate the coating characteristics by standard analytical procedures. Composition and morphology of the materials were characterized by different spectroscopic techniques. Polyacrylate based polymers were synthesized by step growth polymerization using different types of monomers moieties (5 different types of acrylic monomer along with one functional monomer and an aromatic monomers) to enhance coating properties and to enhance dispersion of carbon nanotubes. Characterization was done by FTIR (Fourier Transform Infra-Red) and UV-Vis spectroscopy. Study of polymeric coating was done on different surfaces by different techniques like Barcol Hardness, Gloss Test, Salt Spray Test, Cross Hatch Test and Mandrel Dent Measurement as given in standard ASTM methods. The results revealed better adhesion, crack resistance, and abrasion resistance. The graphical abstract is given below as Fig-1. Graphical Abstract: Fig. 1: Graphical Abstract Key words: Acrylates, Nano-fillers, Polymeric coatings, Corrosion resistance, Penetration of coating material, Carbon nanotubes dispersion in polymeric solution, Scratch resistance.